1. Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the DIAMOND SIZE takes place. Different gap sized. After passing from the die the diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to enable the next stitch to take place.

　2. The chain link is automatically wound to form rolls when the desired length is manufactured.

　3. The machine is controlled by PLC automatic controller, so only one person is needed to operate it.

　4. One side or both sides of the end of net hole is twisted or with burr in edge.

　5. Use compacting machine to make it into rolls.

Technical Parameter

1. Width scope of weaving: 1--4m; suitable for all kinds of Electro-galvanized, hot-dipped galvanized diamond shape mesh
2. Mesh scope of weaving: 30--100mm(According to the requirements of customers, can provide 2 different types of knife molds)
3. Wire scope of weaving: 1.8—4.0mm
4. The output per minute: for example: if the mesh is 50*50mm,width 2000mm, the output will be 1M2/min
5. The machine is controlled by PLC automatic controller
6. Power consumption: 9KW
7. Weight of equipment: 4200kg
8. Outside size: main machine:6700*1430*1800mm 5100*1700*1250mm
9. Electric System:
1)Japan Mitsubishi PLC origin
2)Servo motor 
3)Low-voltage electrical from France Schneider
4)Electric & Machinery from Taiwan Teco Electric
5)Clutch from Taiwan YA CO., LTD.
10. Suitable wire to the machine: high-quality low-carbon steel wire, Galvanized Steel Wire, Stainless steel wire, Aluminum alloy wire, Aluminum-clad Steel Wire
11. Chain link Fence is extensively used as fences for playground and gardens, highway, railway, airport, port, residence, etc.

12.Wire diameter for different mesh size:

Packing & Delivery

FAQ

1: What is your gurantee?
A: Main frame for 1 year. But,our machine's quality is very good, and using long life.
2. What is your company normal payment terms?
A: Usually we accept T/T 50% in advance and balance 50% before shipment.
3.What are your company normal export terms?
A: We normal export with CFR, CIF and FOB trade terms.
4.How many days it will take you to produce mass production for us?
A: Normally it takes about 25-35 days, it also depends on the order quantity and production seasons.
5. Are your engineers can go abroad to install machine?
A: Yes, our engineers available to severice machiney oversea and train workers
 

Why choose us?
1.Professional service for products
2.Much more competitive price
3.Honest and excellent manufacturer with more than 22 years experience.
4.Delivery time is shorter than others.
5.We believe the good quality is the basis for cooperation.
6.We could provide free samples for test to you.

Our Service

1.If the buyer need,we can send our technical staff to the buyers factory to install the machine and providing the training in 30 days after the machines arrived the destination pory

2.Maintenance period:One year for whole machine except vulnerable parts

3.The number of technical persons :one technician per machine

4.The fees:the buyer have to pay the technical salary 100 USD per day,and the round-trip ticket,accommodation and other related fees

5.During the maintenance period.if the parts are broken caused by the product problem.seller will offer the parts for free,if you need we assign the technicians to your factory ,then you will pay some related fees.

Our Company

Contact With Us