Product Description

 

	Wire mesh welding machine
	To fulfill the ever-growing demands of our esteemed clients, we manufacture and supply welded wire mesh machine. These machines are used for making welded wire mesh rolls for meeting diverse requirements of market. Our machines are available in different models and sizes at most competitive prices with excellent quality.

 

  

PRODUCT PARAMETERS
Model	Mesh Width	Min. Mesh Size	Wire diameter
L-DHW1X1/2-A	1m	1/2x1/2	0.45-0.85mm
L-DHW4X1/2-B	4ft	1/2x1/2	0.6-1.3mm
L-DHW5X1-B	5ft	1x1	0.6-1.3mm
L-DHW6X1-C	6ft	1x1	0.8-1.6mm
L-DHW7X1-D	7ft	1x1	1.4-2.6mm

Detailed Images

 

1 The longitude wire and cross wire are fed from wire coils automatically. Longitude

wire :Wire rolling machine+Bobbin stand-off with rollers (0.65-1.2mm) Iron wire

pay-off (1-2.5mm).Cross wire:wire pay-off

2 The cross wire are pre-straightened &pre-cut.

3 The middle knife can cut the mesh into 2 mesh if width enough.The side knife will

cut the extra cross wire out of side.

4 The thorn shaft(above big shaft) is to fix the mesh.

5 The little shaft is to keep the tensity of mesh.

6 In front of machine on the right is control cabinet.It can adjust speed.

7There are transformer,motor,reducer on the backside of machine.

8 The raw material can be low-carbon steel wire (black wire) and galvanized wire.

9 We will use Schneider electric components, Delta inverter in the electric control cabinet.

We will use the best quality main motor&reducer, it will be equipped with inverter.

10 The middle cutter and sider cutters can be adjusted randomly to make two mesh

rolls at same time.The mesh roll length can be set by counter switch on the control panel.

11 The welding transformers have 8 degrees and can be adjusted for different wire

diameters.The welding time and welding current can be adjusted on the control panel

to adjust the welding degree.

Advantage

1 easy operated

2 high production

3 advanced technology electronics.

4.Separate control technology, make welding transformers working separately to reduce

needed capacity.

5.Different position of button and control box with inverter (Taiwan Delta), not easily broken

like before, easier to operate.

6.Sealed welding transformers, it has 8 degrees, can be adjusted for different wire diameters.

7.Square steel bottom instead of angle iron bottom. 1.5mm steel plate instead of

0.2-0.3mm steel plate, more stable.

Detailed Information

 

 

 

FAQ

 1: What is your gurantee?
A: Main frame for 1 year. But,our machine's quality is very good, and using long life.
2. What is your company normal payment terms?
A: Usually we accept T/T 50% in advance and balance 50% before shipment.
3.What are your company normal export terms?
A: We normal export with CFR, CIF and FOB trade terms.
4.How many days it will take you to produce mass production for us?
A: Normally it takes about 35-40 days, it also depends on the order quantity and production seasons.
5. Are your engineers can go abroad to install machine?
A: Yes, our engineers available to severice machiney oversea and train workers

Why choose us?
1.Profeesional service for products
2.Much more competitive price
3.Honest and excellent supplier
4.Delivery time is shorter than others.
5.We believe the good quality is the basis for cooperation.
6.We could provide free samples for test to you.

Our Services

 1.If the buyer need,we can send our technical staff to the buyers factory to install the machine and providing the training in 30 days after the machines arrived the destination pory
2.Maintenance period:One year for whole machine except vulnerable parts
3.The number of technical persons :one technician per machine
4.The fees:the buyer have to pay the technical salary 100 USD per day,and the round-trip ticket,accommodation and other related fees
5.During the maintenance period.if the parts are broken caused by the product problem.seller will offer the parts for free,if you need we assign the technicians to your factory ,then you will pay some related fees.

Company Information

 

 

 

contact us