| Functions |
Field-line testing, monitoring, recording AC leakage current and Large current |
| Power source |
DC6V, alkaline battery LR06 1.5V×4 |
| Testing Method |
By integrating the output voltage signal , you can restore the real input current |
| Inner diameter |
(φ200mm(Optional,Can be customized) |
| Range |
0.00A-6000A |
| Resolution |
10mA |
| Accuracy |
±2%±3dgt(cable in the center of the coil，23℃±2℃) |
| Coil Length |
630mm((Can be customized)) |
| Current Frequency |
50Hz~60Hz(The measured current frequency，Automatic Identification) |
| LCD Display |
LCD：128dots×64dots |
| LCD Size |
44mm×27mm |
| Host Dimension |
W*L*H75mm×170mm×30mm
|
| Diameter |
φ7.5mm(Suitable for narrow cable-intensive sites) |
| Weight |
Host(240g),Flexible Coil(150g) |
| Electric field interference |
no magnetic saturation, high linearity, strong anti-interference ability |
| Position error |
cable in the center of the coil,don't put the cable at the split area,error doubles or more at the split area |
| Sampling Rate |
2 samples/s |
| Data storage |
4200 sets (data loss does not occur after power failure or replacing the battery) |
| Time Setting |
Recording internal adjustable from 1 to 60 min, If set to 0 min, the auto-store function is turned off |
| Recording Time |
Continuously operate for about 100hours at the power-saving mode |
| Line Voltage |
Line with a voltage up to AC600V |
| Overflow Display |
The “OL” symbol is displayed when a measured value is beyond the measurement range |
| Battery. Voltage |
A Low-Battery symbol is displayed and the user should replace the battery with a new one when the battery voltage drops to 4.6V to 4.8V. In this case, the measured values are still accurate. |
| Rated Power |
about 5mA at the power-saving mode, maximum current consumption: 20mA |
| Lead Length |
2m |
| Temperature and Humidity |
Working: -10℃～40℃；below 80%rh |
| Storage: -10℃～60℃；below 70%rh |
| Insulation Resistance |
Higher than 100MΩ, 1000V |
| Safety Codes |
IEC1010-1, IEC1010-2-032, Pollution Class 2, CAT Ⅲ(600V), IEC61326(EMC standard) |
| Accessories |
Host: 1 PCS, Flexible Coil: 1 PCS, Instrument bag: 1 PCS, RS232 Com-cable:1 PCS; Software Disk: 1 PCS,Batteries:LR06：4pcs |
