RTO is a high efficiency organic waste gas treatment equipment.Compared with the traditional catalytic combustion and direct combustion thermal oxidation furnace, it has the characteristics of high thermal efficiency, low operating cost, high air volume and low concentration exhaust gas, etc. When the concentration is a little high, it can also carry out secondary waste heat recovery, which greatly reduces the production and operation costs.

RTO, regenerative oxidation furnace.The principle is to oxidize the combustible waste gas into the corresponding oxides and water at high temperature, so as to purify the waste gas and recover the heat released when the waste gas is decomposed. The waste gas decomposition efficiency reaches more than 99% and the heat recovery efficiency reaches more than 95%.The RTO main structure consists of combustion chamber, ceramic filler bed and switching valve.According to the actual needs of customers, choose different ways of heat recovery and valve replacement.

The working principle of

The principle is to heat organic waste gas to more than 850 degrees Celsius, so that the VOC in the exhaust gas is oxidized and decomposed into carbon dioxide and water.The high temperature gas produced by oxidation flows through the special ceramic heat accumulator, making the ceramic body heat up and "heat storage", which is used to preheat the subsequent organic waste gas entering.This saves fuel consumption as the exhaust gas heats up.The ceramic heat accumulator shall be divided into two or more zones or Chambers, each of which shall go through the procedures of heat storage, heat release, and cleaning successively.After heat release, a proper amount of clean air should be introduced to clean the heat storage room immediately (to ensure that VOC removal rate is more than 95%). Only after the cleaning is completed can the heat storage program be entered.