Introduction of gold mining separator shaking table for gold ore separation

shaking bed is designed to wet gravity-based separation of minerals and other granular materials.
There are many applications where the concentrating table is of particular value and cannot be equaled for economical and efficient performance. They are effective in processing precious and base metal, rare metal and non-metallic minerals

Application and Performance of gold mining separator shaking table for gold ore separation

6-S shaking bed is one of the main equipment for gravity classification, which is widely applied in the classification of tungsten, tin, tantalum, columbium and other rare metal and precious metal ore. shaking bed is designed for wet gravoty-base separatiom of minerla and other granular materials. It is effective in processing precious and base metal, rare and non-metallic minerals.

Advantages and Characteristics of gold mining separator shaking table for gold ore separation

1 Ingenious structure of inertial gearing, self balanced vertical force component. No vertical jump because no vertical vibrating force. It can be installed on the building floor, or on the bracket
2 Lift type, minimal consumption of friction, reduce vibration and energy-saving, non-required bulky base, quick and flexible installation
3 It adopts fiberglass deck with wear-resistant layer, wear-resistant, waterproof, anti-dry, anticorrosion, non-deformed, less maintenance, long service life
4 The deck installed in an uniform frame Layer-by-layer, easy to install and unload, increase processing capacity per unit area. Replace different weight blocks can change the stroke of shaking bed
5 It adopts variable-frequence governor, easily change frequency of stroke to adapt different material with different particle size and feature

Working Principle of gold mining separator shaking table for gold ore separation

The shaking bed consists of transmission, electromotor, slope adjuster, bed, ore groove, water groove and luconstruction and requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil pump.
2. Decks
The decks are built of 16 mm zircon-reinforced fiberglass with fabricated steel frames at the bottom and are easy to clean, requiring little maintenance. The fiberglass decks also have the characteristic of water-resistance and corrosion-resistance.
3. Feed box and water box
A wooden feeding box with hooper and long water box are attached to the iron of deck, feeding evenly.and stable inside, the final ore concentrate and the final.