Introduction:

Gasboard-5020 is an analyzer for control of exhaust gases from gasoline, petrol, alcohol or LPG engines. It integrates non dispersive infrared (NDIR) detectors for the measuring CO, CO2, HC and electrochemical sensors (ECD) for O2 and NO.

 

This instrument is small in size, easy to operate, accurate and function reliable.  The general application is for automobile emission check station, automobile factory Automobile Repair Plant and engine factory etc. Automobile engine can be set in user-defined working condition. Exhaust data can be obtained through clear steps and prompt.Through analysis of exhaust data, it can help you to determine the cuase of exceeding exhaust and come up with repair s estions. For example, it helps you to judge TWC working status, cleanliness of the air cleaner.

 

Application:

Vehicle repair plant

4S service shop

Engine factory

Exhaust gas monitoring

Traffic inspection station

Vehicle inspection line

 

 

Specification:

Model		Gasboard-5020
Measurements		CO2,CO,HC,O2,NO gases, Lambda display
Technology		NDIR for CO2,CO, HC;  ECD for O2,NO
Measure Range		CO2	CO	HC	O2	NO
		0-20%	0-10%	0-9999ppm	0-25%	0-5000ppm
Resolution		0.01%	0.01%	1ppm	0.01%	1ppm
Error(which ever is greater)	Rel.	±4%	±3%	±5%	±3%	±5%
	Abs.	±0.4%	±0.06%	±12ppm	±0.1%	±25ppm
Warm-up Time		10 minutes
Display		LCD display
Response Time		TD+T90: 10 seconds(NDIR);  ECD:30 seconds
Power		110V -220V±10%  50Hz±1Hz
Operation Tem.		0-40 ℃
Dimension		260x180x360mm
Net weight		6kg
Flow rate		0.7-1.2L/min
Standard accessories		Sampling probe, sampling pipe, RS232 cable, standby filters,PC software
Options		Oil temperature option, in-built printer, RPM sensor options

 

 

Features:

1.Simultaneous measuring CO, CO2, NO, HC, O2, Lambda

2.Automatic calculation and display of Lambda and A/F

3.LCD screen and keypad buttons for easier setting and operation

4.Selection of fuels:petro, LPG, Natural Gas, alcohol

5.Selection of C3-C6 factor

6.Automatic zeroing and air purge before each measurement circel

7.Optional various type RPM sensors

8.Optional oil temperature measurement probe

9.Equipped with RS-232C digital serial interface and PC software

10.Small size, light weight and most convenient for carry.

 

Dimensions

360mm(L)*266mm(W)*183mm(H)

Weight:6.5kg