Product instruction

Air Bead Seater is the simple, fast, safe and economical way to seat even the most difficult tire beads. Designed for use on tires from 17.5in.to 24.5in dia. The unit supplies high volumes of air into the tire, expanding the sidewalls to quickly set the bead onto the wheel rim. Doubles as a standard air tank.

Operation

1. Take air from an air compressor, the air pressure need to keep between 6 ~ 8 psi in the air tank. The safety valve will be opened automatically to allow air to escape when the pressure is more than 8 psi, and the air entrance will be also closed, then the tube must be removed. (Warning! Do not take gas nozzle forward to people, it could be an accident).

2. Put the nozzle of the tube of bead seater between rim and tire, hook nozzle toward the rim, and hold the tank to prevent rollback. And then open the switch to charge air in the tire.

3. After the air charging, you have to empty the air inside of the tank, and the put the bead seater in a safety place.

4. Warning! Do not take gas nozzle forward to people; you have to put safety glasses and ear plug to avoid possible.

Technical parameters