SPECIFICATION:

MODEL:BL29
SERIES:Bicycle headlight
LED:2 X T6 LED
BATTERY:
DC version with 8.4V Lithium battery pack
USB version with 5V/2A mobile power supply
LUMEN:2200LM
RUN TIME:Refer to battery capacity
DIMENISON:44*38.5*50mm
WEIGHT:89g
MATERIAL:6063-T6 Aviation aluminum
SURFACE FINISH:Surface anodic oxidation treatment

FEATURES:

Adopt 6063-T6 Aviation aluminum housing material, bright LED, good heat dissipation.
Original American CREE XML2 LED,high brightness and long lifespan.
Digital constant current circuit, constant brightness.
IP66, can adapt to a large variety of environment.
Special small angle PMMA LED lens, bring a good focusing performance.

LIGHTING MODES:

STRONG LIGHT:
100% brightness,this mode with biggest power consumption, biggest brightness, shortest peak run time, you need to equip with big capacity Luthium battery pack or mobile power supply.
MEDIUM LIGHT:
50% brightness,this mode with medium power consumption,medium brightness,peak run time also belong to medium,applicable for ridding in the road with street lights.
WEAK LIGHT:
15% brightness,this mode with smallest power consumption,longest peak run time,applicable for city road ridding.
STROBE:
Flashing at 8Hz at strong light mode,applicable for emergency prompt.
LIGHT MODE:
Each time when switch on, the ligting mode is switching on one time, switching order:STRONG->MEDIUM->WEAK->OFF, keep the cycle like this.
SPECIAL:
Under"NON OFF"mode,long press switch 1Second, enter into fast flashing mode, slight touch the switch,exit fast flash light mode and move to weak light mode.
TURE OFF THE LIGHT:
1. No matter under which lighting mode, slightly press the switch, switch lighting mode to "OFF".
2. No matter under any lighting modes,you only need to slight touch the switch 1minute, the lamp will turn off.

BATTERY BALANCE INDICATION:
There are two battery balance indicators at the rear,respectively corresonds to the following battery balance,
Green light on :>10%,red light on ≤10%.