Sinopak 35kV Indoor Air Cooled STATCOM (China Manufacturer) - Other Power Supply & Distribution

Sinopak 35kV Indoor Air Cooled STATCOM

Model:	-
Brand:	Sinopak
Origin:	Made In China
Category:	Electronics & Electricity / Power Supply & Distribution / Other Power Supply & Distribution
Label:	STATCOM , SVG , static var generator
Price:	US $120000 / Set
Min. Order:	1 Set

Inquire Now

Product Description

Sinopak 35kV Indoor Air Cooled STATCOM

(Static Synchronous Compensator), also known as SVG (Static Var Generator)

SVG is a chain-type static synchronous compensator (STATCOM/DSTATCOM, also knows as SVG) —active dynamic reactive and harmonic compensation device at different compensation ranges.

SVG, different from impedance compensation (injecting or absorbing reactive power by capacitor and reactor) theory of traditional SVC, is based on voltage source converter, whose theory is equivalent to static synchronous condenser but whose performance is better than that of condenser and SVC. Especially, its operation range is wide, and its reactive compensation under low voltage is far greater than that of SVC.

Technical Parameters

System Parameters
Rated voltage		3kV~35kV
Input voltage range		0.2～1.2Pu
Grid frequency		50±0.5Hz
Rated capacity		±1Mvar ~ ±120Mvar
Full load power loss		<0.8%
Total harmonic current distortion		≤3%, meeting GB/T14549-1993
Total PCC harmonic voltage distortion		≤3%, meeting GB/T14549-1993
Response time		<5ms
Overload capacity		1.1 times over-load, long time operation; 1.2times over-load for 1minute, trip
Fault treatment		Redundancy design meeting automatic N-1 operation
Operation mode		Constant reactive power mode, constant voltage mode, constant power factor mode, load compensation mode, Voltage& Reactive power integrated control mode
Communication protocol		Modbus, IEC104
Monitoring mode		Local/remote control
HMI		LCD touch screen in English
Signal transmission		Optical-fiber communication
Key technology		Instantaneous reactive power theory, SPWM theory, decoupling control technology, capacitor voltage balance control technology, three-phase independent control technology, single pole multiple frequency technology, carrier phase-shifting SPWM theory, chain link temperature real-time monitoring technology
Power interface		380VAC, 220VDCdual circuits dual redundancy power supply
Main protection function		Over-current, Over-voltage, drive fault, Power unit over voltage, over-current, over-temperature, communication faults etc. water-cooling failure
Wiring method		Star connection or Delta connection
Cooling method		Air cooling, water cooling
Protection class		Indoor IP30	Container: IP54
Installation method		Indoor	Outdoor
Service life		30Years
Operation environment
Ambient temperature		-25℃～+45℃
Storage environment temperature		-40℃～+70℃
Altitude		2000m(To be customized in case of > 2000m
Relative humidity		≤90％, no condensation
Pollution grade		Class IV
Executive standard	DL/T 1215.1-2013，GB/T 14549-1993，GB/T 17626.2-2006，GB/T 17626.3-2006，GB/T 17626.4-2008，GB/T 17626.5-2008，GB/T 17626.11-2008

Our Advantage

1. Most effective high voltage active harmonic equipment in the industry
Sinopak TSVG successfully realize high voltage active harmonic filtering function from 3kV~35kV according to many years experiences. It can eliminate harmonics from 2nd to 13th completely. Compared with traditional SVC, SVG adopted active components. TSVG is not only used for dynamic reactive power compensation equipment, but also used for high voltage active harmonic filtering equipment directly.

Sinopak TSVG adopts cascade topology, with lower output harmonic content and very good filtering effect.

High Quality Power Units Design for moisture-proof and dust-proof.

Fully closed design of power unit control panel ensures operation stability in humid, windy and dusty environment, Control drive board on power unit adopts silicone material with good performance for potting. The silicone can stay resilient and stable within -55°C~+180°C, and has better thermal conductivity and insulativity, ensuring stable operation of SVG in salt-spray environment.

2. Control Cabinet Design Advantage
Fully closed design of control cabinet ensures use reliability in sand-dust or humid environment.

Fully closed design of control cabinet prevents external dust or soot from entering control cabinet. After being closed, it needs to receive heat dissipation; to ensure internal temperature within a reasonable range, upper and lower parts of control cabinet interior are respectively equipped with one fan for up-down and right-left circular flow of air in it so as to decrease the temperature.

Whole control system components are comprehensively screened, with low power consumption and high reliability, to improve whole system stability. Thermal simulation of FlOWTHREM software is used to control 67°C average internal temperature when external ambient temperature is 45°C so as to meet component temperature in service environment. It fundamentally solve dust prevention and pollution prevention problems.

3. Service Advantage
Power Module Tester

SVG mainly consists of many power modules, in order to help customers find module fault in time, Sinopak designed power Module tester, it is very easy and very fast to find the module faults.

By the way, Sinopak also install GPS module in SVG control room in order to help customer analyze SVG faults.