Sinopak 3~11kV Indoor Water Cooled Static Var Generator

Sinopak 3~11kV Indoor Water Cooled Static Var Generator
Model:-
Brand:Sinopak
Origin:Made In China
Category:Electronics & Electricity / Power Supply & Distribution / Other Power Supply & Distribution
Label:static var generator , SVG , STATCOM
Price: US $88000 / Set
Min. Order:1 Set

Product Description

Sinopak 3~11kV Indoor Water Cooled Static Var Generator

STATCOM

(Static  Synchronous  Compensator), also known as SVG (Static Var Generator)  

 SVG is a chain-type static synchronous compensator (STATCOM/DSTATCOM, also knows as SVG) —active dynamic reactive and harmonic compensation device at different compensation ranges.    

SVG, different from impedance compensation (injecting or absorbing reactive power by capacitor and reactor) theory of traditional SVC, is based on voltage source converter, whose theory is equivalent to static synchronous condenser but whose performance is better than that of condenser and SVC. Especially, its operation range is wide, and its reactive compensation under low voltage is far greater than that of SVC.

Technical Parameters

System Parameters

Rated voltage

3kV~35kV

Input voltage range

0.2~1.2Pu

 Grid frequency

50±0.5Hz

Rated capacity

±1Mvar ~ ±120Mvar

Full load power loss

<0.8%

Total harmonic current distortion

≤3%, meeting  GB/T14549-1993

Total PCC harmonic voltage  distortion

≤3%, meeting GB/T14549-1993

Response time

<5ms

Overload capacity

1.1 times over-load, long time operation; 1.2times over-load for 1minute, trip

Fault treatment

Redundancy design meeting automatic N-1 operation

Operation  mode

Constant reactive power mode, constant voltage mode, constant power factor mode, load compensation mode, Voltage& Reactive power integrated control mode

Communication protocol

Modbus, IEC104

Monitoring mode

Local/remote control

HMI

LCD touch screen in English

   Signal transmission

Optical-fiber communication

Key technology

Instantaneous reactive power theory, SPWM theory, decoupling control technology, capacitor voltage balance control technology, three-phase independent control technology, single pole multiple frequency technology, carrier phase-shifting SPWM theory, chain link temperature real-time monitoring technology

Power interface

380VAC, 220VDCdual circuits dual redundancy power supply

Main protection function

Over-current, Over-voltage, drive fault, Power unit over voltage, over-current, over-temperature, communication faults etc.  water-cooling failure

Wiring method

Star connection or Delta connection

Cooling method

Air cooling, water cooling

Protection class

 Indoor IP30

 Container: IP54

Installation method

Indoor

Outdoor

Service  life

30Years

Operation environment

 

Ambient temperature

-25℃~+45℃

Storage environment temperature

-40℃~+70℃

Altitude

2000m(To be customized in case of > 2000m

Relative humidity

≤90%, no condensation

Pollution grade

Class  IV

Executive standard

DL/T 1215.1-2013,GB/T  14549-1993,GB/T 17626.2-2006,GB/T 17626.3-2006,GB/T 17626.4-2008,GB/T 17626.5-2008,GB/T 17626.11-2008

 

Our Advantage

1. Most effective high voltage active harmonic equipment in the industry
Sinopak TSVG successfully realize high voltage active harmonic filtering function from 3kV~35kV according to many years experiences. It can eliminate harmonics from 2nd to 13th completely. Compared with traditional SVC, SVG adopted active components. TSVG is not only used for dynamic reactive power compensation equipment, but also used for high voltage active harmonic filtering equipment directly.

Sinopak TSVG adopts cascade topology, with lower output harmonic content and very good filtering effect.

High Quality Power Units Design for moisture-proof and dust-proof.

Fully closed design of power unit control panel ensures operation stability in humid, windy and dusty environment, Control drive board on power unit adopts silicone material with good performance for potting. The silicone can stay resilient and stable within -55°C~+180°C, and has better thermal conductivity and insulativity, ensuring stable operation of SVG in salt-spray environment.

2. Control Cabinet Design Advantage
Fully closed design of control cabinet ensures use reliability in sand-dust or humid environment.

Fully closed design of control cabinet prevents external dust or soot from entering control cabinet. After being closed, it needs to receive heat dissipation; to ensure internal temperature within a reasonable range, upper and lower parts of control cabinet interior are respectively equipped with one fan for up-down and right-left circular flow of air in it so as to decrease the temperature.

Whole control system components are comprehensively screened, with low power consumption and high reliability, to improve whole system stability. Thermal simulation of FlOWTHREM software is used to control 67°C average internal temperature when external ambient temperature is 45°C so as to meet component temperature in service environment. It fundamentally solve dust prevention and pollution prevention problems.

3. Service Advantage

Power Module Tester

SVG mainly consists of many power modules, in order to help customers find module fault in time, Sinopak designed power Module tester, it is very easy and very fast to find the module faults.

By the way, Sinopak also install GPS module in SVG control room in order to help customer analyze SVG faults.

Sinopak 3~11kV Indoor Water Cooled Static Var Generator 1Sinopak 3~11kV Indoor Water Cooled Static Var Generator 2Sinopak 3~11kV Indoor Water Cooled Static Var Generator 3Sinopak 3~11kV Indoor Water Cooled Static Var Generator 4

Member Information

Zhuhai Sinopak Electric Ltd.
Country/Region:Guang Dong - China
Business Nature:Manufacturer
Phone:15989754164
Contact:Ashley Lin (Sales Manager)
Last Online:25 Mar, 2024