Huashida Heat Shrinkable Sleeve

Huashida Heat Shrinkable Sleeve
Model:-
Brand:Huashida
Origin:Made In China
Category:Chemicals / Rubber Materials
Label:heat shrink sleeve , shrinkable trap , pe conjoint belt
Price: ¥30000 / TON
Min. Order:1 TON

Product Description

Radiation Cross-linked PE Heat shrinkable Sleeve

                Patent Certificate No.: ZL 2010 2 0634590.0

Description 

The radiation cross-linked polyethylene heat shrinkable belts, which are mainly used for Steel pipe anti-corrosion and repair of oil and gas pipeline joints. At present, our company has three layers of reinforced and two-layer heat shrinkable belts (sleeve) and Plastic welder. We have acquired the patents certificate. 

The H.S.S is composed by a radiation cross-linked PE substrate, hot melt adhesive. Huashida company use a unique hot melt adhesive formula to ensure the adhesive strength of the product and construction quality. It is easy to operation of the new design of the heat shrinkable belt (sleeve) on-site construction. It wast short time to rapidly shrink, and cost lower. It is also with excellent waterproof vapor permeability, chemical resistance, insulation and aging resistance, etc. It is the  ideal material for pipeline anti-corrosion insulation project.

This Sleeve is suitable for 3PE steel pipe, 2PE steel pipe, epoxy powder coating, PE insulation jacket pipe and polyethylene water and drainage.

The HSS made by HSD according to the requirements of the GB/T23257-2009 standard and the oil & gas industry standard SY/T4054-2003. Also meet the requirements of international standards such as EN12068, DIN30672, and ASTM D1000.

Executive standard

GB/T23257-2009 Technical Standard for Polyethylene Coatings for Buried Steel Pipes

SY/T4054-2003 Oil and Gas Industry Standards

There are two type for Heat shrinkable sleeve: closed / Pathch (open)

 

Specification

 

Heat shrinkable sleeve for underground buried steel pipe and insulated pipe

  • For Oil & Gas Pipe 

5000pt;s�ai)I�`Hss-linked PE substrate, hot melt adhesive. Huashida company use a unique hot melt adhesive formula to ensure the adhesive strength of the product and construction quality. It is easy to operation of the new design of the heat shrinkable belt (sleeve) on-site construction. It wast short time to rapidly shrink, and cost lower. It is also with excellent waterproof vapor permeability, chemical resistance, insulation and aging resistance, etc. It is the  ideal material for pipeline anti-corrosion insulation project.

 

This Sleeve is suitable for 3PE steel pipe, 2PE steel pipe, epoxy powder coating, PE insulation jacket pipe and polyethylene water and drainage.

The HSS made by HSD according to the requirements of the GB/T23257-2009 standard and the oil & gas industry standard SY/T4054-2003. Also meet the requirements of international standards such as EN12068, DIN30672, and ASTM D1000.

Executive standard

GB/T23257-2009 Technical Standard for Polyethylene Coatings for Buried Steel Pipes

SY/T4054-2003 Oil and Gas Industry Standards

  • For pre-insulated pipe

-we� �:oP�I)Ityle:normal;font-size:12.0000pt;" > / Pathch (open)

 

 

Specification

 

Heat shrinkable sleeve for underground buried steel pipe and insulated pipe

  • For Oil & Gas Pipe 

5000pt;s�ai)I�`Hss-linked PE substrate, hot melt adhesive. Huashida company use a unique hot melt adhesive formula to ensure the adhesive strength of the product and construction quality. It is easy to operation of the new design of the heat shrinkable belt (sleeve) on-site construction. It wast short time to rapidly shrink, and cost lower. It is also with excellent waterproof vapor permeability, chemical resistance, insulation and aging resistance, etc. It is the  ideal material for pipeline anti-corrosion insulation project.

 

This Sleeve is suitable for 3PE steel pipe, 2PE steel pipe, epoxy powder coating, PE insulation jacket pipe and polyethylene water and drainage.

The HSS made by HSD according to the requirements of the GB/T23257-2009 standard and the oil & gas industry standard SY/T4054-2003. Also meet the requirements of international standards such as EN12068, DIN30672, and ASTM D1000.

Executive standard

GB/T23257-2009 Technical Standard for Polyethylene Coatings for Buried Steel Pipes

SY/T4054-2003 Oil and Gas Industry Standards

No.

Size, mm

Length, mm

Patch

Length(mm)

Width(mm)

1

Ф159*500

670

Length equals the width of heat shrinkable sleeve

80

2

Ф219*500

860

100

3

Ф273*500

1000

100

4

Ф325*500

1200

100

5

Ф355*500

1300

100

6

Ф406*500

1460

120

7

Ф508*500

1800

120

8

Ф610*500

2170

120

9

Ф711*500

2500

150

10

Ф813*500

2880

150

11

Ф1016*500

3480

150

12

Ф1219*500

4120

200

13

Ф1420*500

4780

200

 

 

Heat Shrinkable Sleeve is for HDPE spiral pipe and Metal reinforced corrugated pipe.

 

For metal reinforced HDPE corrugated pipe (drainpipe)      2)  Plastic manhole

Pipe Diameter(mm)

Length( mm)

Width(mm)

DN300

1200

300

DN350

1430

300

DN400

1600

300

DN450

1770

300

DN500

1900

300

DN600

2300

300

DN700

2560

300

DN800

2900

400

DN900

3250

400

DN1000

3600

400

DN1200

4250

400

DN1400

4940

500

DN1500

5290

500

DN1600

5630

500

DN1800

6320

500

DN2000

7010

500

DN2200

7700

500

DN2400

8390

500

 

Remark:

  • Sleeve Thickness:

Pipe Diameter<=400:  Backing thickness>=1.2mm, Adhesive Thickness>=1.0mm

Pipe Diameter>=400:  Backing thickness>=1.5mm, Adhesive Thickness>=1.0mm

Thickness of sleeve :1.2-3.0mm, width 50-700mm (we can made)

 

2. On the basic of the original product(heat shrinkable sleeve/belt with 2 layers) Qingdao Huashida Machinery Co., Ltd. has developed the 3-layer fiber reinforced PE heat shrinkable sleeve/belt. It is composed of cross-linked polyethylene back, a middle layer of fiber and special heat melt adhesive. The 3 layer reinforced sleeve/belt gives better shrink ratio, and better strength. It is resistant to corrosion, wear, impact, UV and aging, easier to be operated. The heat shrinkage of 2layers is 25%-35%, 3layes is 45-50%.

 

The above table is standard size. Tell us your demand, we can made as users demand. Please inform me what kind of pipe you used heat shrink sleeve to, and sleeve width and thickness. Then we supply our price for you. 

Huashida Heat Shrinkable Sleeve 1Huashida Heat Shrinkable Sleeve 2Huashida Heat Shrinkable Sleeve 3Huashida Heat Shrinkable Sleeve 4Huashida Heat Shrinkable Sleeve 5

Member Information

Qingdao Huashida Machinery Co., Ltd
Country/Region:Shan Dong - China
Business Nature:Manufacturer
Phone:13963975523
Contact:Diana (Sales Manager)
Last Online:15 Oct, 2018