Easy Die-cutting 3M UHMW PE Film Tape 5421 for Conveyor thick 0.13MM

 

Details

Translucent, abrasion resistant backing helps protect surfaces from wear.

Low coefficient of friction for “slip plane” effect between surfaces.

Rubber adhesive provides good initial tack for immediate bonding to material surface.

Can help reduce squeaks, rattles and other noises that occur with movement.

Used in applications where lubrication is not possible because of contaminationUsed in applications where lubrication is not possible because of contamination.

Liner makes it ideal for fabricating or die-cutting into various lengths and shapesLiner makes it ideal for fabricating or die-cutting into various lengths and shapes.

 

Used to protect surfaces from abrasion, 3M™ UHMW-PE Film Tape 5421 is a thin caliper general purpose polyethylene tape that creates a "slip plane" effect to allow contact without wear. This tape features a unique combination of properties that make it ideal for many tough impact wear or sliding applications. 3M™ UHMW-PE Film Tape 5421 is a thinner version of 3M™ UHMW-PE Film Tape 5423.

 

Product Description

3M™ UHMW Polyethylene Tapes are film coated with a rubber adhesive which provides an excellent abrasion resistant surface. These tapes feature a unique combination of properties that make it ideal for many tough impact wear or sliding applications. 3M™ UHMW-PE Film Tape 5421 is a thinner version of 3M™ UHMW-PE Film Tape 5423.

 

 

Typical Physical Properties

Note: The following technical information and data should be considered representative or typical only, and should not be used for specification purposes.

	3M tape 5421	3M tape 5423	ASTM Test Method
Adhesion to Steel:	34 oz./in. width (37 N/100 mm)	36 oz./in. width (39 N/100 mm)	D-3330
Tensile Strength:	46 lbs/in. width (796 N/100 mm)	86 lbs/in. width (1500 N/100 mm)	D-3759
Elongation at Break:	470%	530%	D-3759
Backing Thickness:	5.0 mils (0.13 mm)	10 mils (0.25 mm)	D-3652
Total Tape Thickness (without liner):	6.7 mils (0.17 mm)	12 mils (0.30 mm)	D-3652
Liner Thickness:	3.5 mils (0.09 mm)	3.5 mils (0.09 mm)	D-3652
Temperature Use Range:	-30° to 225°F (-34° to 107°C)	-30° to 225°F (-34° to 107°C)	---

 

Features
Tape demonstrated no evidence of wear through after Taber Abrasion at 1000 cycles, using CS-10 wheel and 1000g load when applied to S-37 mounting sheet.
Low water vapor transmission rate <0.50 g/100in.2/24hrs.
Thick caliper UHMW polyethylene tape for extended service life as a protective surface against tough impact wear or sliding applications.
Outstanding abrasion resistance so will outwear PTFE and other materials in sliding applications.
Low coefficient of friction characteristics is exceeded only by PTFE.
UHMW-PE tape can be used where lubrication is not possible because of contamination.
Rubber Adhesive provides good initial tack for immediate bonding to material surface.
Liner makes it ideal for fabricating or die-cutting into various lengths and shapes.

 

Application Ideas
Noise reduction between dissimilar parts.
Reduce squeaks, rattles and other noises that occur with movement
Lining of conveyer guide rails, tank and bin liners, and discharge chutes.
Protection for aluminum sheets on stretch forming presses.
Liners for Spray booths.
Slick surface for easy glide for drawers and cabinets.

 

Recommended Applications

Conveyor guide rails and chutes

Spray booth liners

Tank and bin liners

Drawer and cabinet slides

Protecting aluminum sheets on stretch forming presses

 

Our Company was founded in 2015,we are focus on Tape Die cutting,rewinding, slitting, bonding and other precision processing.We can produce the most satisfying products for our customers according to the requirements of customers' product specifications or drawings. if you have 3M product request ,welcome for quote.

3M Double Side Tape
1.3M VHB Tape :4905,4910,4914,4920,4930,4936,4941,4945,4949,4956
2. 3M PE Foam Tape :1600T，4004,4008,4026,4032,4052,4056,4462,4466,4965,3M4212,4215,4229P,4218P
3.3M adhesive tape:9075,9080,9448,9672LE,9495LE,9495MP,9690B,55256,55257,55258
4.Electrical Adhesive Tape :3M1350,1318,74,56, #23, super33+,1500,1600
5.Soctch Tape :3M600,610,810

3M Bumpon ,hook and loop .
Bumpon：SJ5302 SJ5303 SJ5306 SJ5012 SJ5312 SJ5514 SJ5023 SJ5808 SJ5816 SJ5832
3m Dual lock：SJ3526 SJ3527 SJ3571 SJ3572 SJ3540 SJ3541 SJ3542 SJ3550 SJ3551 SJ3552