The charcoal ball machine is mainly used to press the charcoal dust that is hard to mold, which is characterized by big molding pressure, adjustable host  with a screw feed device.
 This product can be find in many industries like refractory, power plants, metallurgy, chemical industry, energy, transport, heating, etc. Charcoal balls made by Hongrun ball machine has the advantages of energy saving, easy to transport, and it greatly improving waste utilization.                     
From the storage silo, the material is fed into the molding machine hopper evenly by the quantitative device. Then the regulation board on the hopper make the material evenly enter into the middle of the roller; the reverse operating roller compress the material and the forming pressure increases gradually, at the centerline of the roll the forming pressure reaches its maximum value, once the material through the line, the molding pressure rapidly decrease so that the material forms into ball shape and smoothly discharge the ball.
The charcoal balls/briquettes made by the charcoal ball machine can be used as BBQ charcoal fuel. Charcoal ball press machine can press charcoal powder, charcoal dust, coal powder, etc into ball,square or pillow-shaped charcoal. Four rollers, two of them can be movable.
The final product that briquette press gives is smokeless,non-toxic,no peculiar smell and environment protective,applicable to the outdoor or indoor barbecue with ventilation.
The final charcoal briquettes with high density are easily burnt.The diameter of briquettes can be 20-60 mm.
Features:
high pressure,high molding rate,high output,easy operation,rare fly-ash,evenly distributed heat and stable quality.

Web: www.cnhrmachinery.com
evelyn//-(@cncharcoal=machine.-)com