Panasonic NPM-D3 electronics assembly chip mounter machine

 

The evolutionary Panasonic NPM-D3 continues in the steps of its award-winning predecessor with interchangeable dispensing, placement, and inspection heads; however, new enhancements further increase productivity. The NPM-D3 now handles a component range spanning 03015mm microchips to massive 100x90mm components up to 28mm tall, as well as Package on Package applications.

A new base frame, redesigned placement head, and Multi Recognition Camera improve placement accuracy by 25%, while boosting IPC-9850 throughput 30% to an industry-leading 38,078 CPH per square meter. The new Multi Recognition Camera provides component alignment, defect inspection, chip thickness, and 3D coplanarity inspection in a single pass, which helps ensure high productivity and quality control.

With its advanced board handling design, the NPM-D3 maximizes area productivity. In single lane mode, the NPM-D3 handles 750mm long boards ideal for LED panels. With a simple software switch, the NPM-D3 automatically converts to dual lane “shared” or “independent” mode. For the highest efficiency, the NPM-D3 offers auto board support, feeder cart hot-swap, intelligent feeder anywhere, and 2D-coded nozzle anywhere for changeover without disrupting production. The NPM-D3 enhances product quality with thermal compensation, board warp mapping, a 20-tray direct tray cart, complete component monitoring, and material verification and control.

As always, manufacturers can scale NPM production lines to meet production needs while conserving investments until production or technology requirements mandate. OEMs and EMS providers can reconfigure the machine heads in approximately 15 minutes—maximizing flexibility, minimizing ROI, and protecting assets. The NPM-D3 also incorporates existing feeders, carts, and nozzles to minimize investment and inventory expenses.

Other members of the NPM line include the NPM-W2 for high mix volume applications and the twin tray NPM-TT2.

Plus new enhancements:

Compact footprint - scale production to your factory needs

Quick-change feeder carts, nozzle banks, and process heads

Compatible with CM- & AM-series intelligent feeders & nozzles

Board warp detection, Adaptive Process Control (APC), and Auto Board Support Pin

Industry's first 3D Multi Recognition Camera

Lightweight 16-nozzle head (for 84,000 CPH)

Increased placement accuracy to 25um (cpk ≥1.0)

Specification

Model ID		NPM-D3
Rear head Front head		Lightweight 16-nozzle head	12-nozzle head	8-nozzle head	2-nozzle head	Dispensing head	No head
Lightweight 16-nozzle head		NM-EJM6D				NM-EJM6D-MD	NM-EJM6D
12-nozzle head
8-nozzle head
2-nozzle head
Dispensing head		NM-EJM6D-MD				-	NM-EJM6D-D
Inspection head		NM-EJM6D-MA					NM-EJM6D-A
No head		NM-EJM6D				NM-EJM6D-D	-
Specification
PCB dimensions*1 (mm)	Dual-lane mode	L 50 x W 50 ~ L 510 x W 300
	Single-lane mode	L 50 x W 50 ~ L 510 x W 590
PCB exchange time	Dual-lane mode	0 s* *No 0s when cycle time is 3.6 s or less
	Single-lane mode	3.6 s* *When selecting short conveyors
Electric source		3-phase AC 200, 220, 380, 400, 420, 480 V 2.7 kVA
Pneumatic source *2		0.5 MPa, 100 L /min (A.N.R.)
Dimensions *2 (mm)		W 832 x D 2 652 *3 x H 1 444 *4
Mass		1 680 kg (Only for main body:This differs depending on the option configuration.)

Used Panasonic CM602-L, SMD MACHINE, 

Lead free reflow oven, solder paste printer, pcb linking conveyor, solder paste inspection machine, assembly line, wave solder...

Contact:

Elaine 86-18898671670

Wechat: czsffy1223

Skype: elaine19920114

E-mail: elaine(@)smdmachine.com / smttechpnp(@)gmail.com

http://www.smdmachine.com

<p font-size:14px;color:#3a3939;background-color:#ffffff;"="" open="" sans",="" arial,="" helvetica,="" sans-serif;="" font-size:="" 14px;="" white-space:="" normal;="" background-color:="" rgb(255,="" 255,="" 255);"="" style="box-sizing: border-box; margin: 0px 0px 10px;">Address: Shenzhen/Zhongshan, Guangdong Province, China