One: Product introduction
FRP integrated sewage lifting pumping station has the characteristics of small size, high efficiency, anti-corrosion, anti-leakage, intelligent and so on. Compared with traditional pumping stations, the amount of civil engineering, short manufacturing and installation cycle, investment can be reduced by more than half. Pumping station is easy to install and reliable in quality, and is a substitute for traditional concrete sewage lifting pumping station.
II: Characteristics of prefabricated pumping stations
1: Customized on Demand
Each set of prefabricated pumping stations is designed according to the data provided by the customer to ensure that the operating conditions of the pumping station meet the requirements of use.
2: new material
The cylinder structure of precast pumping station is made of fiber winding FRP to ensure uniform thickness and meet design requirements, and the quality is stable and excellent.
3: Accessories Standard
All accessories are prefabricated in the factory, including pressure piping, maintenance platform, inbound and outbound water pipes, etc., before leaving the factory to carry out testing to ensure that the quality of accessories reliable.
4: Highly integrated
 Prefabricated pumping station as an integrated equipment, complete sets of supply: Pumping station cylinder, pressure pipe, maintenance platform, maintenance ladder, grille device, coupling system, ventilation device, anti-skid manhole cover and so on.
5: Beautiful appearance
Prefabricated pumping stations are all buried underground, the ground only has maintenance holes and control boxes, but also optional landscape management room placed on the ground, in harmony with the surrounding environment.
6: Cost savings
Pumping station for a complete set of supply, all internal installation and commissioning work in the factory to complete, the site only need to install the pump station as a whole, greatly reduce the civil construction cycle and engineering costs, reduce the overall investment of the owner.
7; Service life
Pumping Station cylinder material for FRP material, internal accessories using SUS304 and hot-dip galvanized and other anti-corrosion materials, no maintenance, normal service life of up to 20 years.
8: Easy Maintenance
The pump and grille are all equipped with rails, which can be quickly removed and installed during maintenance.
9: Feature Extensions
Prefabricated pumping station can be used with our company's integrated sewage treatment equipment, the construction of a complete sewage treatment and reuse system.
Third, the pump station selection needs to provide data:
1, pumping station into the flow Q (t/day), the maximum time change coefficient
2, the number of pumps required and the lift, one with one or two with a ready
3, Outdoor floor elevation H0 (m), can also use relative elevation ±0.00 (m)
4, the inlet pipe outside the takeover of the bottom elevation H1 (m), the inlet pipe outside the control diameter DN
5, outlet pipe foreign takeover bid high H2 (m), outlet pipe outside the takeover diameter DN
6, the selected grille type, basket grille or smash grille
7, Electronic control box type, outdoor rainproof control cabinet or landscape management room