Guy Grip

Model:	-
Brand:	Glame
Origin:	Made In China
Category:	Electronics & Electricity / Optical Fiber, Cable & Wire / Cable Parts
Label:	guy grip , preformed guy grip , guy grip dead end
Price:	US $0.5 / Piece
Min. Order:	1 Piece

Inquire Now

Product Description

Guy wire fittings

Adjustable guy wire clamp

Design

This type of dead ends is a fast, simple safe method for retaining or securing cables such as staywires, groundwires etc.

Standard products have an open helix loop but they can be supplied with a cabled loop to prevent slackening of the line after prolonged installation.

The dead ends are made of material compatible with the cable to which they are applied

The dead ends with helical wires are used to given an even distribution of force ever a wide surface preventing strain concentration and potential damage to conductors.

Its breaking load exceeds that of the conductor to which is applied.

Note

The layer direction of distribution-grip dead ends must be the same as that of the outer stranding of the conductor to which it is applied.

Ordering Information

When ordering, please specify:

-conductor type,stranding,breaking strength and lay direction

-groove width and diameter of fitting used.

Guy-grip dead ends

Selection Chart

Model	Sectional area (mm²)	Outside diameter(mm)	Clamp length(mm)	Clamp weight(kg)	Fittings (thimble clevis、adjustable clamp)
NL-25G	25	6.60	640	0.2	0.2
NL-35G	35	7.80	720	0.3	0.3
NL-50G	50	9.00	910	0.5	0.5
NL-70G	70	11.00	1020	0.8	0.8
NL-95G	95	12.50	1340	1.7	1.7
NL-100G	100	13.00	1340	1.7	1.7
NL-120G	120	14.00	1460	2.2	2.2
Note: The meaning of the letters and numbers in the model no.: N-strain clamp；L-spiral preformed；after“-”is the suitable steel strand type；The guy wire is the galvanized steel cables (YB/T5004-1993).