KINGREAL high speed multi-sizes Studs & Tracks roll forming machine

Model:	KRLGJ-200
Brand:	KINGREAL
Origin:	Made In China
Category:	Industrial Supplies / Construction Machine
Label:	studs making machine , tracks making machin , roll forming machine
Price:	¥9000 / pc
Min. Order:	1 pc

Inquire Now

Product Description

KINGREAL high speed studs and tracks making machine can produce various sizes of studs, tracks on one machine. Based on different customer‘s request, there are different ways to adjust the width, automatically or manually.

The studs and tracks roll forming machine is used for production of different sizes of studs and runners, the output speed is up to 100m/min. The studs and tracks roll forming machine is featured with follow punch and fly shearing system.

By changing different molds size and punch molds, it can produce different sizes of products for the market.

Light Steel Keel Roll forming machine

1. Roll Forming Equipment composition:

The studs and tracks equipment consists of a discharge machine, a guiding frame, a forming host, a calibration device, a cut-off part, a receiving table, and an electrical control part.

2. Equipment performance:

Unit rolling capacity: width ≤ 200mm

Sheet thickness 0.6-1.2mm

Production speed: 30-100 m / min

Total installed capacity: about 5.5kw

Production area: length 15 meters x width 2.5 meters
The specific design plan is customized according to the customer‘s product drawings and customer requirements.

●Light steel keel roll forming machine Product Description:

The light steel keel roll forming machine uses strip steel as raw material to produce complex section profiles through continuous cold rolling forming, with various models and various functions. We can design and manufacture different specifications of cold bending and roll forming equipment according to customer requirements.

●Product characteristics

The light steel keel produced by the light steel keel roll forming machine is a new type of building material with the following characteristics:

1. Fire prevention: Light steel keel is made of fireproof galvanized sheet and is durable.

2, the structure is reasonable, using economical placement structure, special connection method, combined loading and unloading, convenient, saving man-hours.

3, beautiful appearance: the surface of the keel is galvanized steel, after baking treatment.

4, light weight, high strength, short construction period, simple construction, which is widely used by users and design units.

●Product application
The light steel keel roll forming machine is used for the decoration of non-load-bearing walls and roofs of buildings with light-weight plates such as gypsum board and decorative plasterboard. It is the decoration of various roofs of buildings and the inside and outside of buildings. The base material for wall and scaffolding ceilings. It is used in hotels, terminal buildings, passenger stations, stations, theaters, shopping malls, factories, office buildings, old building renovations, interior decoration settings, ceilings and other places.

KINGREAL Drywall studs and tracks high speed roll forming machine machine is made of strip steel as raw material and is produced by continuous cold rolling to produce complex section profiles (products include: light steel keel, studs roll forming machine, tracks roll forming machine, runners roll forming machine, painted keel, card keel, various architectural profiles, steel structures, steel lining frame profiles, High-speed barriers, etc.) and different specifications of cold-roll forming machine and painting units are controlled by PLC.

Features of the roll forming machine:

1. Unit rolling capacity: width ≤ 150mm, sheet thickness 0.6-2.0mm

2. Production speed: 30-100 m / min

3. Total installed capacity: about 15kw

4. Production area: length 15 meters X width 2.5 meters

1. The equipment control is PLC control, and multiple safety protection is set during normal production.

2. The bed is welded with steel plates. It is also tempered to eliminate internal stress and avoid deformation of the fuselage.

3. The forming frame is cast iron structure and tempered. High strength and long service life.

4. The material of the roll shaft is 40Cr, and the hardness is HB280 after quenching and tempering treatment.

5. The material of the forming mold is Cr12MoV, quenching treatment, hardness: HRC 56-62 °C.

6. The transmission structure is gearbox transmission. Each forming frame has a light steel keel machine. It can guarantee the equipment over time, high intensity operation and long service life.

Processing technology of metal studs and tracks roll forming machine machine: discharging----directing----roll forming----cutting----receiving

Light steel keel machine equipment consists of: discharge machine, guiding frame, forming host, calibration device, cut-off part, receiving table, electrical control part and so on.