Summary of functions:

ET2725 process calibrator is a multifunctional, high-precision portable instrument. Specially designed for process control, is suitable for the industrial field deb ing, can meet the requirements of a wide range of tasks, support source volts, current, resistance temperature detectors (RTD), thermocouples (TC), frequency, and ohms. measure and source all process parameters, such as measurement and Output can also be calibrated to secondary instruments that can measure these parameters with accuracy of 0.02%.

Product features:

Super-strong protection:The waterproof grade is IP67. Automatic protection against the signal terminals connect to the 220V

A split-screen display. The upper display allows you to measure volts, current (with loop power), resistance and continuity test. The lower display allows you to measure and source volts, current, resistance temperature detectors (RTD), thermocouples (TC), frequency, and ohms.

The accuracy 0.02% or 0.05%.

Calibrates a transmitter using the split-screen.

The measure of thermocouple provides automatic reference junction.

Automatic and manual cold end temperature compensation for TC.

Manual stepping and automatic stepping and ramping.

APSL intelligent pressure module with high precision can be selected according to customer needs to realize pressure measurement function.

 

Summary of Source and Measure Functions

Function	Measure	Source
DC V	0~60V (the upper display ± 30V)	0~10V
DC mA	0~24mA (the upper display ± 24mA)	0~24mA
Frequency	1.000Hz ~ 100.00kHz	0.00Hz~20.000kHz
Resistance	0~3200Ω	0~3200Ω
DC mV	0~100mV (the upper display ± 200mV)	0~100mV
RTD	Pt100, Pt1000, Cu50, Cu100	Pt100, Pt1000, Cu50, Cu100
TC	E, J, K, T, B, R, S, N	E, J, K, T, B, R, S, N
Others	Loop supply, Step, Ramp, Dual display

  Specifications

Specifications are based on a one year calibration cycle and apply from +18 ºC to +28ºC unless stated otherwise. All specifications assume a 10 minute warmup period.

DC Voltage Measurement

Range	Maximum measurement range	Resolution	Accuracy ( % of reading + counts)
			ETX-2725B(0.05)	ETX-2725A(0.02)
28V (upper display)	-33V~33V	0.001V	0.05+2	0.025+2
200mV (upper display)	-200mV~200mV	0.01mV	0.05+2	0.025+2
50V (lower display)	-1V~60V	0.001V	0.05+2	0.02+2
100mV (lower display)	-15mV~125mV	0.01mV	0.05+2	0.02+2
-10°C~18°C,+28°C~55°C temperature coefficient,±0.005%FS/°C. Input resistance: >1MΩ.

  DC mA measurement

Range	Maximum measurement range	Resolution	Accuracy ( % of reading + counts)
			ETX-2725B(0.05)	ETX-2725A(0.02)
20mA (upper display)	-24mA~24mA	0.001mA	0.05+2	0.025+2
20mA (loop of upper display)	0~24mA	0.001mA	0.05+2	0.025+2
20mA (lower display)	0~24mA	0.001mA	0.05+2	0.02+2
-10°C~18°C,+28°C~55°C temperature coefficient,±0.005%FS/°C.. Input resistance:<100Ω.

  Resistance Measurement (upper display)

Range	Maximum output range	Resolution	Accuracy ( % of reading + counts)
			ETX-2725A
400Ω	0~440Ω	0.1Ω	0.05+2
3200Ω	420Ω~3300Ω	1Ω
On-off test	0~200Ω	1Ω	0.05+1
-10°C~18°C,+28°C~55°C temperature coefficient,±0.005%FS/°C.
Maximum load voltage: 20V, equivalent to voltage of 20mA on 1000Ω load resistance.

 Resistance measurement (lower display)

Range	Maximum measurement range	Resolution	Accuracy(Ω)
			ETX-2725B(0.05)		ETX-2725A(0.02)
			Two-wire, three-wire	Four-wire	Two-wire, three-wire	Four-wire
400Ω	0~440Ω	0.01Ω	0.25	0.15	0.15	0.1
3200Ω	420Ω~3600Ω	0.1Ω	1.5	1	1	0.5
-10°C~18°C,+28°C~55°C temperature coefficient,±0.005%FS/°C.
Exciting current during measurement: 400Ω:0.4mA±10%;3200Ω:0.2mA±10%.
Two-wire: Does not include lead resistance.
Three-wire: Assumes matched leads with a total resistance not exceeding 25Ω.

General Technical Specifications

The other parameters

Temperature: - 10 ℃ ~ 55 ℃

Storage temperature: - 20 ℃ ~ 60 ℃

Weight: 650 grams

Dimensions: 200mm*96mm*47mm

Power supply: 6Pcs AAA battery ni-mh or AC ADAPTER

Communication channel: RS232 

18P02 communication wires

Power adapter(18A52)

Probes(18A53)