Product Description

Walk-in constant Temperature and humidity laboratory for industry large parts, semi-finish product,finish products temperature and humidity environment testing. Such as computer terminal, car components.constant temperature and humidity room is composed of control panel,switchboard,hydrating panel,fan,heater,humidifier,refrigerator.

This equipment mainly used for create and keep temperature humidity constant space,completely automatic control refrigeration,heating,dehumidify,humidification,supplementary humidified water,The equipment can be added (optional)air exchange function,operator can long term work in it when exist poor volatile gas.Suitable for electrical, electronic,instrument and other products, parts and components salt spray test chamber and material compatibility test of storage transport using under high low temperature alternating,humid and hot environment.

Model: RHWP-6

System：Balanced temperature & humidity control system

Temp.Range：R.T-65℃~+120℃

Humidity Fluctuation：20%~95%R.H

Temperature Deviation：±0.5℃

Humidity deviation：±2.5%R.H

Heat Up Time：20°C~80°C 60minutes

Pull Down Time：20℃~-55℃,-40℃,-30℃,-20℃,-10℃ within 120 or 90 or 60 minutes.

Internal dimension：48*21*43CM

External dimension：59.5*23.5*22.5CM

Insulation material：Stainless steel 304

Exterior meterial ：Model steel 

Insulation meterial：Rigid polyruethane foam +glass fibre

Floor bearing load：500Kg/m3

Interior material : 12.9CBM

Refrigeration system：1. Air cooled (Water cooled type is option).

                                        2. Cascade type, hermetic/semitight compressor,CFC free refrigerant

Controller：Color LCD screen in English/Chinese, programing,communicating function

Safety devices：No welding wire switch, compressor overheating and over current protection, over temperature protection, blower overload protection, dry heating machine protector,low water protection, fault warning system.

Standard accessories：one test hole(diam5cm), two sets of test racks, four moving wheels, 2 meters of power cord, communication  interface.

Options：RS-232C, recorder, special test hole, special test stand, add shelf partition

Power：AC380V±10% 50HZ   3 phase 4 wires+ground wires