Product Description:

1.Tungsten carbide rod are mostly applied for drill bits, end mills, and reamers with sub-micron grain grade YG10X, for non-ferrous precision cutting and wood cutting with grade YG6X, and for fiberglass reinforced plastics, titanium alloys, hardened steel with ultra-fine grain grade YG8X, etc.
2. The tungsten carbide rods we can manufacture and supply are varied in different sizes as well as tungsten carbide grades.
3. Following is a detailed description of one kind specification of tungsten carbide rod:

• Main function: Diameter:1.5 mm x 330mm
• Surface Condition: Sintered blank
• Chemical Composition: WC :88.5% + Co: 10% + Others: 1.5%
• Density: 14.2~14.6 g/cm3
• Hardness: HRA91.5 min.
• T.R.S.: 3200N/mm2 min.  

4. Tungsten carbide rods include rods with the shapes of round, rectangular and square, solid rods and rods with one or more straight or coolants. The grades are mostly fine and super fine grain with high performance.
5. Tungsten carbide rod applications include drill bits, end mills, and reamers. Custom diameters and length are also available in these grades as well as metric sizes. 

Features:
1. Introduction of raw materials: YL10.2 cemented carbide is made of WC as the main raw material, plus the TIC and TAC and paste phase of the precious metals of the west tour. It is sintered by low-pressure sintering by powder metallurgy method and has high hardness of 91.8HRA. 2880N/MM2 high strength alloy material.
2, high-precision advanced equipment: Germany imported 10MPA low-pressure sintering furnace sintering.

Waiting for your kindly inquiry.