Hot sale ac electric 10 bar screw air compressor

Product Description

Hot sale ac electric 10 bar screw air compressor using the double-screw meshing technology, through the parallel meshing of rotors (or screw) rotation, so that the air between the rotor slots constantly produce periodic volume changes, thus generating compressed air.
Compared with piston air compressor, screw air compressor has the advantages of high efficiency, more stable, more energy saving, low maintenance costs and etc..
Mainly used in machinery, metallurgy, power generation, automotive, shipbuilding, textile, chemical, petrochemical, electronics, paper, food, and other industries.

 

 

Technical Tarameters

Model		JNG-15A
Cooling method		Air-cooling
Pressure (Mpa)		0.7/0.8/1.0/1.2
Air delivery (m3/min)		1.65/1.53/1.32/1.10
Motor	Power    (KW)	11
	Speed    (rpm)	2980
	Start method	Y-Δ
	Voltage  (V/Hz)	380/50
	Protection grade	IP54
	Insulation grade	F
Driven type		Direct
Noise                (dBA)		63
Gas oil content      (ppm)		≤3
Outlet temperature   (℃)		≤Ambient temperature +15
Control type of exhaust volume		Intake accommodation control
Setting pressure of safety valve   (Mpa)		Air compressor exhaust pressure +0.1
Lubricating oil quantity  (L)		15
Lubricating oil brand		Jinniu
Size	L          (mm)	820
	W         (mm)	1050
	H          (mm)	1080
Weight                (KG)		450

 

 If this mode is not meet your requirements, please check the Model List below:

 

 

Advantages

1. The Air End is Germany technology and has excellent performance. The rotor adopts the new-generation optimized molded lines which can achieve the maximum utilization coefficient of area, shorter line of contact, smaller area of leakage, lower specific power and higher efficiency. Highly reliable design is applied on the major and minor diameter ratio of rotor, which enhances the rigidity of rotor, and increase the through-flow area of the air inlet and outlet to achieve low revolving speed, small noise, long life and high reliability.

2. The machine is equipped with efficient and low-energy motor with SKF bearing, F insulation and the level of protection of IP54. The motor applies grease lubrication, has high efficiency. It can be customized based on the specific demands of clients.

3. The machine adopts efficient oil filter imported with original packaging, and the efficiency is 20% higher than the common filter. It can effectively remove the impurities and degraded substances of oil in the lubricating oil to protect moving parts.

 

4.Efficient filter material imported with original packaging is applied to ensure effective dust prevention of the engine of compressor. The air filter adopts special paper and reasonable geometric folding design, which can achieve better filtration against the dust in the air and long working life.

5.Good quality air cooler with low noise is used, and the design conforms to the air motion principle which can realize better heat dissipation.

6. The new type of air inlet valve of no-vulnerable-part design of a famous brand is used, which can automatically adjust the air flow based on the air consumption of the system to guarantee stable operation of the device, reduce the operation costs and energy; automatic protection function is used against shutoff upon automatic loading and unloading.

 

 

Certifications

 

Our Company

 Since 1997,More than 22 years’ experience, is the earliest enterprise in Henan province obtain the national production license for air compressors.

We have more than 200 employees and covers an area of 24,000 square meters. It integrates design, development, production, sales and professional after-sales service team.

For many years, it has been rated as “Consumer Trustworthy Unit”, “Contract-honoring and Credit-worthy Enterprise” and “Key Protected Enterprise”.

The certificates obtained are “CE certificate”, “ISO9001 certificate” and “general mechanical product production license”.

FAQ

 

Q1. Are you factory or trade company?

Factory, Since 1997

Q2. Can we customize different voltage?

Yes, we can customized for you.

Q3. What's your delivery time?

Within 3-7 days 

Q4. Where is your factory?

Kaifeng City, Henan province, 1 hour to Xinzheng Airport, 1 hour to Zhengzhou fast train station.

Q5. What's your MOQ?

1set.

 

Contact Us

Contact person: Emma Hee

Email: export(at)jncompressor.com

Phone(Whatsapp): +86 15500580520

Skype: export(at)jncompressor.com