NON-ASBESTOS GASKET – GOOD ALTERNATIVE TO COMPRESSED ASBESTOS GASKET
Non-Asbestos Gasket is a general purpose sheet material reinforced with high-grade asbestos- free fibers and bonded with heat-resistant nitrile rubber.

It has excellent anti-stick performance on both sides. It is a good alternative to compressed asbestos gasket.

The gasket is suitable for engineering, auto mobile, chemical, oil & gas, petro chemical, power generation, paper, glass & ceramic, sugar, steel, smelter, boiler, pharmaceutical, Marin and all applications where needs higher temperature and pressure resistance and where non-critical gaseous and liquid media have to be sealed off.

COMMON SPECIFICATIONS

Thickness (mm) 0.4–6.0
Available size (m) 1.5 × 1.6, 1.5 × 2, 1.5 × 3, 1.5 × 4, 1.5 × 6
Maximum continuous working temperature 650 °F
Steam max continuous working temperature -100 °F
Maximum pressure 85 bar
Tensile strength (MPa) ≥ 13
Residual stress (MPa) > 22
Compressibility 6%
Cold compressibility 8%
Cold recovery 3%
Hot creep 22%
Hot recovery 2%
Density (g/cm3) 1.6–2.0
Gas permeability (mL/min) <0.3
Color Black, white, red, blue, orange
FEATURES

Impermeability
Compressibility
Stress relaxation, creep resistance
Resilience
Temperature resistance
Premium quality
Excellent durability
Cost effective
Excellent Heat and Pressure
Chemical Resistant
Have good resistance to natural gases
Anti stick
Anti corrosion
CLASSICAL APPLICATIONS

Oil and gas
Chemical processing
Pharmaceutical equipment
Sea water equipment
Heat exchangers
Condensers
Pulp and paper industry
Power generation
A blue non-asbestos gasket mounted on the mechanical seals.
In mechanical seals

  A green non-asbestos gasket mounted on the flange.