It is refined from water-soluble resin, conductive pigments, surfactants, additives and water. The product is non-toxic, non-irritating odor, non-corrosive and other characteristics.

The product has stable performance, good printing adaptability, low resistivity, excellent electrical conductivity, strong adhesion fastness, fast drying and excellent wear resistance. It can be widely used in printed circuit boards of thin film switches, control instruments, industrial computers, telecommunications instruments and other electronic products. Mainly used for heating film and other electrothermal products (such as polar heating constant temperature; household heating, etc.).

II. Major Technical Indicators

Fineness: <10 um

Viscosity: < 100 seconds (coated - 4 cups, 25 C)

PH value: 8.0-9.0

Adhesion: 100% (tape peeling test)

Heat resistance: (85 52 480h) The resistance value changes within 10%.

Humidity resistance: (40 190% RH: 480h) Resistance value changes within 10%.

Bending resistance: Bend three times in 90 degree range, and the change of resistance value is less than 15%.

1. The shelf life of this product is one year at 5-30 C.

2. In order to keep the properties of the product unchanged, low temperature freezing and high temperature exposure should be avoided.

3. Stir well and evenly before use. The remaining ink collected or unused should be sealed and sealed.

4. When using this product, if the machine stops because of need, the printing roller should be cleaned in time so as not to affect the quality of printing when restarting the machine.

5. When using this product, it can be diluted with 5-25% clear water or ethanol.