Titanium and Titanium Alloy Sheets

Shape, board, board

Material: TA1, TA2, TA3, TA4, TA9, TA10, TC4, etc.

US Standards: GR1, GR2, GR3, GR4, GR5, GR7, GR11, GR12, GR23;

Ti 6Al 4V, Ti-0.2Pd, Ti 0.3Mo 0.8Ni, Ti 3Al 2.5V, Ti 6Al 4V ELI;

Russian Standard Material: BT1-00, BT1-0, BT1-2

Applicable standards: GB/T 3621-2007, GB/T 13810-2007,

American Standards: ASTM B265, ASTM F136, ASTM F67, AMS4928

Specification: thickness (mm): > 4.0-80.0 (hot rolling), 0.3-6.0 (cold rolling)

Width (mm): 400-3000 (hot rolling) and 400-1300 (cold rolling)

Length (mm): 1000-8000 (hot rolling), 1000-4000 (cold rolling)

Production process: forging, cold rolling and hot rolling.

Testing: Tensile strength test, flattening test, hardness test, chemical composition test, high temperature tensile test, room temperature tensile test, bending performance test.

Surface treatment: acid and alkali wash surface, sandblasting surface, bright surface, mirror surface.

Surface quality: high accuracy, good smoothness, no darkening and local water marks on the surface; no scratches, indentations, pits, cracks, peeling, oxide scales, indentation, stratification, metal and non-metal clips, alkali washing marks and other defects.

Delivery state, hot working state (R), cold working state (Y), annealing state (M)

Applications: aerospace, aviation, military industry, light industry, chemical industry, medical treatment and petrochemical industry.

Product advantage: Titanium plate is a new important structural material used in aerospace industry. Its specific gravity, strength and service temperature are between aluminium and steel, but its specific strength is high, and it has excellent seawater corrosion resistance and ultra-low temperature performance. In 1950, the U.S. first used F-84 fighter bomber as non-load-bearing components such as rear fuselage heat insulation plate, air guide hood and tail hood. Since the 1960s, the use of titanium plate has shifted from the rear fuselage to the middle fuselage and partially replaced structural steel to make partition frames.