CLANDE  F series of high flow filter cartridges are fabricated from hydrophilic polymer material. The core filter is made up of extruded polypropylene fiber which is cohered with melting, with large amount of conical fixed bores of high contaminant capacity. The whole filtering layer is fabricated with pleat so that the effective filtering area is greatly increased. Such sophisticated design allow fluid to go through filter at high velocity and flow rate, providing the filter cartridge with high contaminant capacity, efficiency, low pressure drop and long service life. The end covers are connected by melting, which are more secure in comparison with the conventional gluing process without introducing other chemicals. It is equipped with powerful internal support to enable the high bearing capacity and long service life of cartridge and can effectively reduce the housing cost; the unique dual seal design can better guarantee the system safety.

Specifications

Raw martial:

Filter Media            PP /GF

support Media          PP /SS

O-ring         EPDM /Buna-N //Viton/Teflon / Silicone

Dimensions:

outside diameter   6" (152mm)/6.5"（165mm）

Lengths         20" /40" /60" (508mm /1016mm/1524mm)

Applications:

RO security filter

membrane chemical cleaning filter

ultra-filtration backwash filter

EDI membrane stack security filter

Condensate deironing filter

Resin trap

Post-filter for ultrapure water in medicine and electronics industries

Pre-filtering for beer and liquor industries

Filtration of special fluid