GWQ-ph6.0 industrial automatic ph meter controller price

Related product

Description pH controller

The PH controller is one of the intelligent online chemical analysis instruments. It can continuously monitor the data and realize remote transmission monitoring and recording through the transmission output connection recorder. It can also be connected to the RS485 interface . It can be easily connected to the computer through the MODBUS-RTU protocol. Monitoring and recording. 

Detail show pH controller

 

Specification pH controller

  

Type selection pH controller

  

GWQ-							Note
Measurement parameter	pH						0~14pH
Model		2.0					Chinese interface, can be customized English
		4.0					Chinese interface, can be customized English
		6.0					Chinese and English operation interface
Signal communication			S1				4-20mA
			S2				4-20mA,RS485
Electrode type				511			Composite electrode (0~60℃)
				520			Pure water electrode (0~60℃)
				513			PTFE electrode (0~90℃)
				541			High temperature electrode (0~90℃)
				530			Desulfurization electrode (0~60℃)
				550			High temperature sterilization electrode  (0~130℃)
				620			Imported electrode (-5~+80℃)
				Q			Special electrodes can be customized
Temperature compensation					T0		No
					T1		Yes
Lead length						W0	5m(standard)
						W1	Customized(≤50m)

 

Eg:GWQ-pH6.0S1511T0W0

GWQ-pH6.0 controller,4-20mA output,Composite electrode,no temperature compensation, lead length 5m,

Application pH controller

GWQ pH controller widely used in continuous monitoring of PH value or ORP value and temperature in solutions such as thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food and tap water .

FAQ pH controller

1.How does the ph meter measure?

The online ph meter is composed of a controller and a ph electrode. The electrode gives an electric signal to the controller by sensing hydrogen ions in the solution. The ph value of the solution is obtained through an algorithm within the controller.

2.There are many ph types on the website. I don't know which one I should choose?

You can inform our engineers of the working conditions on site, such as the use situation, solution medium composition, solution pH range, solution temperature, etc. Our selection engineer will choose the appropriate electrode for you.

3.Can your ph meter be connected to PLC,DCS or computer on site?

Yes.Our ph controller supports 4-20ma output and can be connected to PLC or DCS.At the same time through the RS485 communication, connected to the computer for data processing.

4.Can your ph controller realize dosing control?

Of course,Our pH controller contains relay control, which can set the pH upper and lower alarm and control the solenoid valve switch, so as to realize dosing control.

Voice of customer pH controller

 

Company information pH controller

 

HOW TO ORDER? CONTACT US NOW AS BELOW⇓