The drilling mud recycling system can reuse the well washing mud after returning to the ground to separate the geotechnical debris carried therein.

mud circulation system working principle

The mud pump pumps the mud in the pile hole through the input port, and the mud is dehydrated by the vibrating sieve coarse sieve plate and then flows into the lower storage tank, and then pumped to the cyclone by the local mud pump for centrifugal separation; A part of the separated mud is discharged from the top outlet of the cyclone to become a recyclable mud, and the other part is discharged from the bottom outlet of the cyclone, and flows into the vibrating sieve to remove and separate the separated slag.

the feature of  Mud Purification System

1. The mud purification and mud recycling effect are good, and the waste slurry can be recycled. After separation by the mud purifier, the sludge contains <3% of mud, which can ensure the use of mud for clearing, pouring and retaining walls under the above construction conditions. The sand has a moisture content of <15% and can be sold directly to achieve profitability.

2. High efficiency of mud recycling system, our company's mud purifier has a large processing capacity per unit time, which can save a lot of disposals cost of waste mud, greatly reduce the amount of waste slurry transportation and save engineering expenses.

3. The cyclone is customized by the manufacturer. It can be adjusted by 20 degrees, 15 degrees and 8 degrees. It can be adjusted for different materials and concentrations to achieve Z-separation effect.

Filter press for sludge treatment

The filter press is a fully-automated system for sludge treatment, does not require operator assistance and in most cases, no additional chemicals are needed. The sludge is sent to every sealed filter chamber by the feeding pump with pressure, going into filter plates and filter cloths. The clean water will be filtered out from the filter plate water outlet by the filter cloth, but the solid is kept in the chambers to separate solid and liquid, finally, we will get the slurry cake to contain 25% water.