Self Balance Smart Scooter Battery Pack 36V 4.4Ah 10S2P 18650 For Electric Hoverboard Battery CE FCC IEC62133
1.Features:
| Basic performance |
| Model |
10s2p/HAC001 |
| Nominal Voltage |
36.0V |
| shipment Voltage |
36.0-37.5V |
| Nominal Capacity(0.2C5A) |
4.4Ah±5% |
| Max Charge Voltage |
42.0V |
| Discharge Cut-off Voltage |
25.0V±1V |
| Max. Charge Current |
2A |
| Standard Discharge Current |
4A |
| Max. Discharge Current |
15A |
| (Approx.)Weight(Approx.) |
650±20g |
| (Max,at 1000hz) Cell Impedance |
≤220mΩ() |
| Charge Method |
Standard |
0.2C5Ax8hrs |
| Quick |
0.5C5Ax5hrs |
| |
Charge |
0ºC-45ºC |
| |
Discharge |
-10ºC-60ºC |
| Operating Temperature |
Storage |
Within a month |
0ºC-45ºC |
| Within a month to three months |
5ºC-40ºC |
| Within three months to one year |
10ºC-35ºC |
2.Charger Parameters
Applying Battery Type: Lithium
Input Voltage (AC/V): 100 to 240V
Output Current (A): 2A
Output Voltage (DC/V): 42.0V
Charging Mode: CC/CV
Type of DC Output Connector: XT60 PLUG
3.Applications: Self Balance Smart Scooter, E-Scooter, Electric Scooter ,Hoverboard Battery!
Do not immerse the battery in water or seawater, and keep the battery in a cool dry surrounding if it stands by.
Does not use or leave the battery near a heat source as fire or heater
Use the battery charger specifically for that purpose when recharging.
Do not reverse the position and negative terminals.
Do not connect the battery electrodes to an electrical outlet.
Do not discard the battery in fire or a heater.
Do not short-circuit the battery by directly connecting the positive and negative terminals with metal objects.
Do not transport or store the battery together with metal objects such as hairpins, necklaces, etc.
Do not strike, trample or throw the battery.
Do not directly solder the battery and pierce the battery with a nail or other sharp objects
4.BatteryQuality:
a. Cells - A grade cells to make sure batteries in high and full capacity
b. Protection - Dual IC chips, that can anti-short circuit, anti-over charger, anti-over current, anti-overload
c. Compose Type : Injection Technology to make battery more stable.
d. Certifications : CE,UL,FCC, RoHS, ISO9001
e. Long life cycle, No memory, environment friendly.
5. BMS Informations:
Our BMS consists of Master BMS Circuitry (we named "BMU"), Slave BMS Circuitry (we integrate it into our
battery module) and contactor. Besides the basic functions such as over charge/ discharge,over current, short
circuit, over temperature and balancing, Our BMS owns the following features,
a. Master-Slave architecture makes the system flexible;
b. Two level warning makes maintenance easier;
c. CAN2.0 and industrial level electronic components make system reliable;
d. Contactor makes high rate charge & discharge feasible;
e. Periodic insulation measurement makes personnel safety possible;
f. Host can control the system easily;
