Automatic Bottle Blow Machine

Item:GRA-A seriese

2/4/6/9cavities with 3000/6000/9000/12000bottles per 500ml bottle

Air leakage switch,middle relay,contactor,button,power switch:Schneider,France

Touch screen: Wenview

PLC:Mitsubishi,Japan

EUGEN SEITZ Blowing valve from German to keep stable working and 33% increase in production;

1, 4pcs of Mitsubishi servo system:Preform feeding,preform transporation,moulds closing, stretching controlled by Servo system

High pressure air Recycle system,no need low air compressor

2,All pneumatic parts are Festo German

3,all display meters& Winview would be displayed any changes at the same time.As all the display meters are connected to PLC to finalize such function.

4,Light tube would be installed easily: only press the fasner,the broken light tube would be taken out and then change the new one.No need to take out the full light base to change tube.

5,preform heating automatic control with transducers:when temperature higher the setting temperature,the wind fan would start to cool.And when temperature lower the setting,the wind fan would stop to keep proper temperature when heating.

6,standby wiring available to replace the broken wiring

7,Change bottle easily