RHH aluminum conductors 

RHH Aluminum cable

RHW-2 Aluminum Alloy cable

RHW-2 type aluminum conductors

Aluminum Alloy UL CSA Standard 

Voltage

600V or less

Construction

RHH or RHW-2 or USE-2 aluminum conductors are AA-8000 series Aluminum Alloy, compact stranded. Insulation is an abrasion, moisture, heat, and sunlight resistant black cross-linked polyethylene (XLP).

Copper conductor is also available.

Standard

RHH or RHW-2 or USE-2 conductors meet or exceed UL Standard 44 (for RHH or RHW-2), UL Standard 854(for USE-2), Federal Specification A-A-59544, and requirements of the NEC. Or other standards required by customers.

Features

1.-40℃----90℃

2.Abrasion, high-Heat and Moisture and Sunlight Resistant.

3.VW-1 or higher required by UL.

Applications

1. RHH or RHW-2 or USE-2 conductors are used with conduit as specified in the NEC.

2. May also be used as underground service entrance cable, for direct burial, at conductor temperatures not to exceed 90℃.

3. When used as RHH, conductor temperatures shall not exceed 90℃ in dry locations.

4. When used as RHW-2 or USE-2, conductor temperatures shall not exceed 90℃ in wet or dry locations.

Package

steel ＆ wooden reel, wooden reel, steel reel, in coils on wooden tray, or other requirements by customers.

Ampacities based on CEC Part 1, Table 4 for not more than three conductors in raceway. For underground installations, refer to CEC, Rule 4-004 for Ampacity rating.