PE-250 × 400 E broken | E broken machine | jaw crusher composition:

        250 × 400 jaw crusher mainly by: fixed jaw plate, activities, jaw, rack, upper and lower guard, adjust the seat, moving rods and other components. A good understanding of the internal structure of the jaw crusher can be used in the jaw crusher and problems in the process can play a very good help.

PE-250 × 400 E broken | E broken machine | jaw crusher operation Note:

(1) crusher after the normal operation, before feeding production.

(2) to be broken material should be evenly into the crusher cavity, should avoid the lateral feeding or filled with the material, so as to avoid overload or bear overload.

(3) normal work, the bearing temperature should not exceed 30 ℃, the maximum temperature shall not exceed 70 ℃. When the temperature is exceeded, stop immediately and identify the cause and exclude it.

(4) before stopping, should first stop feeding, to be completely broken material after the crushing chamber, before turning off the power.

(5) broken, such as crushing due to blockage of material caused by parking, should immediately shut down the power to stop running, the crushing cavity material clean up before re-starting.

(6) jaw plate end of wear, the use of adjustable head.

(7) crusher used for some time, the tightening of the sleeve should be loose and damage the machine.

Technical parameters :