Standards:ShengQuan        
Operating Parameters:Capacity Q: up to 2500 m³/h ( 11000 gpm )/ Head H: up to 80 m ( 262 ft )/ Pressure P: up to 1.6 MPa ( 232 psi )/ Temperature T: up to 160 ℃ ( up to 320 ℉ )
Features: Standard modularization design/ The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position. The driver does not need to be removed if a spacer coupling is used/ The standard seal arrangement has three options: gland packing,single mechanical seal and double seal/ Open wide vane impeller, conveying pulp concentration up to 8% / Contoured wearplate match machined with impeller/ Replaceable wearplate/ Standard grease lubrication/ The pump rotation is clockwise when looking from the drive end./ Jack screws (motor side) for an easier alignment setting