Pressure & Temperature Data; Optional Accuracy 0.05%FS Standby:3,600 H; Φ105mm

SS304 shell, Standard Accuracy 0.1%FS, Optional Accuracy 0.05%FS; Wield used in high precision pressure measurement

Typical Feature

304 stainless steel frosted shell, dial diameter 105mm

With 55X55mm LCD Display, dual pressure and temperature data

Accuracy level: Pressure 0.05%；0.1% (optional) Temperature 0.1℃

Wield Absolute Pressure, Gauge Pressure and Vacuum Pressure

Powered by 3 pcs of AA Battery power, standby time 3,600 Hours

Record maximum and minimum pressure data

10 pressure multiunit switching (MPa/KPa/PSI/BAR/Pa/MBar/mmHg/mH2O/Torr/kgf/cm²)

One key reset to Zero

USB and battery dual power supply

Strong media compatibility, water, oil, gas and other medium without corrosion in stainless steel

Digital Pressure and Temprature Gauge XY-PG210 Brief Introduction

XY-PG210 is a high precision Digital Pressure Gauge and Temperature Gauge, which is built-in high accuracy pressure sensor. It dually displays real-time pressure and ambient temperature data at short response time, the typical characteristics are high accuracy and excellent long-term stability.

The Digital Pressure Gauge has a 55X55mm LCD with 5-Digits display. There are 6 buttons on the front panel to control Reset, backlit display, Power On/Off, Unit converting, low voltage alarm, peak value recording, etc.

Temperature & pressure gaugeis easy to install in Pipeline, Isolation tank or others connect device, easy to set up operating parameter. Working condition is -5-40 ℃, it should be cold once working condition temperature more than 40℃.

It has 304 stainless steel and joint, can be used in measuring gas, liquid, oil and other medium without corrosion for stainless steel, at the same time its shock resistance is very good.