Barco R9842987 input card specification:

Analog/digital converter: 2 x analog device AD9888

Scaler: the scaler algorithm in FPGA is used for 1:1 or scaling

CPU- / frame memory: 64MB SDRAM

Input: up to SXGA 1280× 1024@75hz/input

Pixel clock 20 MHz -- 135 MHz/input

Line frequency 15 kHz -- 115 kHz/input

Hsync+Vsync, Csync, green sync

Sync level 1 V -- 5 V/TTL

Color: 15 BPP / 32K, 16 BPP / 64K, 24 BPP / 16M

Internal frame rate: the maximum frame rate when the internal color depth is 16 BPP and 24 BPP

Input timing: double input mode

(other combinations can be used when considering pixel clock and line frequency requirements) : and textmode @70hz

1280x1024@60hz 2 x 30Hz, 16 BPP 2 × 20Hz, 24bpp

2 x 1280x1024@60hz 2 x 30Hz, 16 BPP 2 x 20Hz, 24 BPP

2 x 1280x1024@75hz 2 x 37Hz, 16 BPP 2 x 25Hz, 24 BPP

Bus: PCI bus, 32 bit / 33 MHz, 64 bit / 66 MHz

Power supply: 5 V(±2%), 3.3 V(± 0.3v), -12 V(±10%)

Power consumption: 5 V / 1.5a, 3.3v / 1.6a, -12 V / 100 mA

Working conditions: 0.. 50° C, humidity 8%-80%, non-condensation

Dimensions: PCI full-length card, 312.00mm x 121.92mm

Weight: 425 g

Connector: 1 x 64 bit, 3, 3/5 V PCI edge connector

2 x 15 pin SubMinD HD connector, VGA compatible

Prices are listed on this site for search engine optimization only, not for any reference.