Three-Axis Simulation Turntable

Inner Axis
（roll）

Centre Axis（pitch）

Outer Axis
（azimuthal）

Function

This device has the function of simulation, position, rate and Swing; It can simulate the three-dimensional motion of the vehicle, it is used in the semi-physical simulation system of the ground, it provide a clean and real sports environment for the load such as the warhead and the seeker and also can provide the benchmark of precise single, two axis and three axis positioning and rate for the tested load, it’s used for static testing and calibration of inertial original components, inertial navigation systems.

Axis Orientation

Vertical（UOO）

Payload Weight

20-80kg

Load Dimension

Ф400×400mm

Table flatness

0.01mm

Degree of Triaxial Intersection

0.5mm

Perpendicularity of Two-Axis

±3″

±3″

Motion Error of Main Axis

±2″

±3″

±3″

Angular freedom

±150°

±65°

Continuous

Position Accuracy

±2″

±3″

±3″

Position Resolution

0.36″

0.36″

0.36″

Rate Range

±0.005°/s~±800°/s

±0.005°/s~±400°/s

±0.005°/s~±200°/s

Rate Resolution

0.001°/s

0.001°/s

0.001°/s

Peak Acceleration

2500°/s2

1500°/s2

800°/s2

System Bandwidth

8Hz

6Hz

4Hz

Conductive Slipring

80 rings/3A

Remote Control Interface

RS232/RS422

Simulation Interface

Reflective Memory

Other

The remote control interface can be adjusted by user’s requirements；
The quantity of conductive slip ring can be adjusted by user’s requirements；
The dimension of table can be adjusted by user’s requirements；
Technical parameter can be adjusted by user’s requirements.