1.Machine Name & Type
LHT-250/17 Medium Copper Wire Drawing Machine with Annealer
2.Machine Characteristic
Fully immerging horizontal slip type four capstan with multi-step replaceable tungsten carbide rings.
A helical gear transmission are enforced lubricant of high effieciency with low noise
A vertical resistance annealer by DC in 3 section, no staem required
Online continuous annealer, single spooler or basket down coiler are available
Microcomputer control of drawing and annealing speed synchronization, equalizing wire soft and eliminating hard wire scrap
3.Technical Data
Inlet wire dia.) 3.0-3.5 mm
Drawing machine Outlet wire dia.) 0.4 - 2.8 mm
linear speed) 3 - 25 m/s
Max. drawing pass) 17
Finish capstan dia.) 250 mm
Main motor) 45 kW
Annealing wire dia.) 0.4-2.8 mm
Annealer ： 25 m/s
(Max. annealing voltage) 50 V
Max. annealing current) 2500 A
Annealing wheel dia.) 300 mm
： 200 L/min (0.6-0.7MPa)
Max. take-up speed) 25 m/s
Single spooler Take-up motor) 7.5 kW
Take-up bobbins) PND400-630 (DIN46397)
(basket size)： Ф800×Ф500×1650
Total weight) 12000 Kg
Overall dimension) 14000×2300×2700 mm
4.Machine Composition
It is composed of pay-off stand, drawing machine, online continuous annealer, single spooler or basket down coiler, electric control system, wire pointer & stripper.
