Density: 7.8 g/cm³
Outer diameter: 6.35 to 508mm,1/4"-20"
Wall Thickness: 0.1 to 30mm,sch5s-sch160
Length: 1-12m
Surface: black,pickling,hairline,180 and 240 grits,6K,8K.
Packing: Woven bag,wooden box or as required
Standard: ASTM A790, ASME SA790, EN 10216-5
Equivalent designations:
Duplex 2205, UNS S32205, UNS S31803, W.Nr. 1.4462, F51

Duplex stainless steel 2205 alloy is a duplex stainless steel composed of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy. It has high strength, good impact toughness and good overall and local resistance to stress corrosion.

2205 stainless steel pipe characteristics:
Compared with ferritic stainless steel and martensitic stainless steel, duplex stainless steel has higher toughness, lower brittle transition temperature, better intergranular corrosion resistance and weldability, while retaining some characteristics of ferritic stainless steel, such as high thermal conductivity, low linear expansion coefficient and superplasticity. Its strength is higher, especially its yield strength is significantly improved, and its properties of resistance to intergranular corrosion, stress corrosion and corrosion fatigue are obviously improved.

2205 stainless steel pipe application:
2205 stainless steel pipe is widely used in chemical industry, transportation of large chemical containers, natural gas and petroleum industry, paper industry, environmental pollution control equipment and so on.

Manufacturing process：
Round tube billet → heating → perforation → head → annealing → pickling → oiling (copper plating) → multi-pass cold drawing (cold rolling) → blank tube → heat treatment → straightening → hydraulic test (inspection) → mark → in Library.

Chemical composition: