Operating principle：

1. Program editing: Real object  compilation, and put the goods well ;

2. Store the edited program and call out the edited problem for similar products.

3. Glue potting nozzle  movement, pump body (driven by stepping motor) for glue supply

4. Motion Trail: straight line, curve, point, box, circle, W type,S type, can follow any irregular trajectory.

5, Z-axis up and down movement using ball shaft screw rapid response.

6 Choose which glue, just choose on the control card.

 The product application

1. LED Light bar category: small module, soft light bar, hard light bar, etc

2. LED Lamps and lanterns: small module, wall washing lamp, projection lamp, line lamp, etc

3 Electronics: waterproof power supply, transformer, circuit board, etc

4. All kinds of non-standard pouring adhesive

A . Resin Glue Configuration : 10: 1 to 4: 1

 

1	Mixing glue ratio	Resin from   10:1 to 4:1
2	Stirring method	Dynamic stirring
3	Machine Route	2000*400*100mm
4	Program mode	Teaching programming
5	Application product	Within 2 meters’LED strip , bar , moudule and lamps
6	External dimension	(L) 2400*(W)1050*(H)1480mm
7	Main pump A	9CC/turn gear pump (Taiwan)
8	Addition pump B	2.4CC/ turn gear pump (Taiwan)
9	Glue barrel Capacity	A:25L，B: 25L Deserve thermostat
10	Squeeze glue volum	2-15g/s
11	Squeeze nozzle	Standard single nozzle, depending on different product, can choose multi nozzles.
12	Input pressure	0.5-0.7Mpa
13	Machine power	20000W
14	Supply Voltage	AC220V±10%,50HZ

 

B.PU Glue disposition : 1:1

1	Glue Ratio	PU Glue      3:1---1:1
2	Stirring method	Dynamic Stirring
3	Machine Route	2000*500*100mm
4	Programming methold	Teaching programming
5	Application products	LED strip , LED lamps  and moudule  within 2 meters
6	External dimension	2400*1050*1480mm
7	pump A	3.2CC/Turn Gear Pump ( Taiwan)
8	Pump B	3.2CC/ Turn Gear Pump ( Taiwan
9	Glue Barrel Capacity	A: 25L, B 25:  Constant temperature device
10	Squeeze glue flux	2-15g/s
11	Squeeze glue nozzle	Standard single nozzle, according to different products , can fix multi nozzles
12	Input pressure	0.5-0.7Mpa
13	Machine Power	2000W
14	Voltage	AC220V±10%,50HZ

 

Device configuration

1	Control System	PLC+ SCM +7.2 inch touch screen
2	Software System	Independent research and development, English interface
3	Moving electronic Motor	YAKO independent research and development
4	Measuring pump	Precision adjustment wear resistant
5	Cut-off System	Independent research and development manufacturing
6	Mixing Arrangement	Independent research and development manufacturing
7	Stirring motor	OUTAI
8	Rack Material	Steel Structure
9	Slide Parts	A3*3mm Independent research and development manufacturing
10	Static mixer cleaning	Independent research and development manufacturing

 

Characteristics of three - axis motion irrigation

1. Simple and convenient operation: touch screen display operation;Full Chinese interface, record, display and alarm of various parameters;According to each product to provide the corresponding fixture, workers training simple, save training time and training costs;

2. Precise control of glue quantity: all key components are imported products, which can ensure high speed and precision and meet the requirements of high reliability under automatic production conditions.

 

Main features:

1. Glue dispensing, glue pouring integration, automatic operation, one machine to achieve two functions.

2, the proportion setting adjustment, the amount of glue can be adjusted.Ready to use at any time, the ratio of high precision, according to the need ratio, save glue.

3, easy to operate, simple program editing, easy to disassemble and convenient, directly put the two kinds of glue A and B into two corresponding buckets, filling the glue, workers just need to press the start switch.

4. According to the performance of glue, the barrel of A is equipped with A constant temperature device, and the barrel of B is well sealed to prevent volatilization. The liquid level induction device will automatically alarm when the glue is lower than this liquid level, and add corresponding glue

5. Convenient cleaning: the mixing pipe of A and B rubber mixture only has the rubber outlet, so the cleaning part only has the mixing pipe, and the other parts do not need to be cleaned. If you need to stop for A period of time after work, you just need to press the automatic cleaning button

 

Accept customized machines with your required size and function.

Service : Free testing , One year Warantee ,and lifetime Service