Features

• High output power, E-Y co-doped
• Warm backup, on-line standby, auto redundancy
• Support ITU channels banding
• Low optical input power, Adjustable output optical power -3dB
• APC / ATC circuit design, built-in high-power optical isolator, mainly used for fiber access network of EPON architecture
• Single/dual input for choice, built in optical switch for dual input, the switching  power can be set by the button in the front panel or by web snmp.
•  Output adjustable by buttons in the front panel or web snmp, the range  is +0.5dBm～-4.0dBm
• Max multi 32 ports, with built in 1310/1490/1550WDM,max total output 37 dBm
• Standard RJ 45 port for remote control, we can provide output contract and web manager for choice, and also plug-in snmp hardware can be reserved for update.
• With laser key to turn on/off the laser.
• With RF test function.
• Adopts  JDSU or Oclaro Pump laser
• Led displays the working condition of the machine
• Dual power hot plug power supply for choice, 90V～250V AC or -48V DC 

  Parameter	Value
  Optical Wavelength	1540～1565 nm
  Input optical power	-10～+10
  Total Output optical power	27～40 dBm
  Output ports	4 / 8 / 16 / 32
  Output adjustable range	-5.0～+0.5 dBm
  Flatness	± 1 dBm
  Optical power stability	± 0.2 dBm
  Noise figure	≤ 5.0 dB（optical input power is 0dBm）
  Input / output optical return loss	≥ 50 dB
  Input / output optical isolation	≥ 30 dB
  Input / output pump leakage power	≤ -30 dBm
  Supply voltage	Double power supply  100～265V 50Hz
  Power consumption	≤ 80W