Mold Rack Characteristic I

The whole product is hinged by bolts.

Mold Rack Characteristic II

The drawer is equipped with positioning and set pins and can be locked in a certain position, which makes it more safe.

Mold Rack Characteristic  III

The bearings under the drawer make it smooth and labor-saving when drawing out and in.

Mold Rack Characteristic IV

The height of drawers can be adjusted.

Mold Rack Characteristic V

To make it more labor-saving, you can install electric hoist at the top the of the rack.

Mold Rack Characteristic VI

The lenght of the rack can be adjusted by actual needs(increasing spans)

Our Laboratory

Conclusion: through ANSYS structure analysis, single pump bearing under the condition of 1 ton, largest stress of up to 199 mpa, basic belongs to the stress concentration, from trying to basic as invisible, in the most force between 14.2 ~ 85 mpa, yield strength of 235 mpa are less than the material itself.