2018 Innovation products 3D Lipo Laser 650 780 940 For Body Slimming Fat Reduction Weight

What is Features of our " 3D 650nm&780nm&940nm lipo laser slimming system "?  

1. Lipo laser machines are 100% non-invasive, laser-based, spot fat reduction and body contouring systems.
2. New design, its wavelengths 650nm&780nm&940nm can work together, and they also can work independently. 650nm enhances metabolism, 940nm go deep into the skin, the two wavelength collaborate harmoniously to lose weight efficiently
3. Japan imported diode laser. 10, 20 or 28 diode laser lamps for each big pads. Unlike others who use poor quality diode laser lamp with not enough effective result, we imported Japan Mitsubish best Diode laser lamp which can each lamp provide 209 mw ,So  Compared with 100mw in the market ,our 209mw of each lamp will more effective to fast weight  loss.
4. Germany imported high quality electronic board, every pad has its own power source and air cooling system, which is convenient to maintain, and prolongs lifespan of diode lasers.
5. The pads can be connected tightly by bandage, which is more effective to lose weight.
6. IC card control system or password control system for option, which is easy to control the total treatment time of machine.

 

 

What is Applications of our " 3D 650nm&780nm&940nm lipo laser slimming system  "?

1. Intensive physical lipolysis to remove fat

2. Excess fat cell melted

3. Lose inches and reduce stretch marks

4. Remove obstruction from channels and collaterals

5. Promote and accelerate the body’s metabolism

 

What is Specifications of our " 3D 650nm&780nm&940nm lipo laser slimming system  "?

Wavelength	Laser diode 650nm & 780nm & 940nm
Output Energy	209mw each diode laser light
Energy Level	1-15
Pulse Time	0.1-5s
Delay Time	0-5s
Treatment Time	1-60mins
Number of treatment paddles	6,8,10,12,14 option
Number of diode laser	10,20,28 each paddles option
Cooling system	Air cooling +wind cooling
Mode of Operation	Continues/time setting
Safety	On Board Diagnostics
Classification	Electrical Class I, Type B applied part
Dimensions	52*40*30cm
Net Weight/Volume Weight	11kg/32KG
Main Power output	220v or 110v/50Hz-60Hz
Environmental Requirement	50°F to 86°F Non-condensing Humidities Below 75%RH

 

Before & After

 

Product Photos

 

 

 

Safe and Painless: 

Lipo laser uses low levels of visible red laser light to create a safe and painless bio-stimulation effect in the targeted fat tissue. This stimulation is of the normal chemical pathways, which the body uses to free up energy resources when required, so Lipo laser doesn’t produce any abnormal effects in the body or damage body tissue such as cells, blood vessels or neighbouring nerves or vital organs.

 

The treatment can be performed on all skin types and body areas where unwanted fat is stored and you can return to normal activity immediately after treatment.

 

Immediate results:

Results can be seen immediately after treatment.Typically a 2-4 cm loss in abdomen circumference can be achieved with every treatment.

 

A course of 8 treatments is recommended over 4 weeks with 2 treatments per week.

FAQ

Q1. How many treatments will I need?
A1. We recommend 2 treatments per week for 4 weeks.

Q2. Can I have more than one course?
A2. Yes but it is essential to have a two week gap between courses.

 

Q3. Can I have more than one area treated at one time?
A3. Yes if you are prepared to do more cardio vascular exercise.

 

Q4. Will the inches stay off after a treatment?
A4. If you maintain a healthy diet and exercise routine then yes.

 

Q5. What actually happens to the fat?
A5. The fat cells are undamaged, but due to the reaction of the laser light on the cell it will empty
the contents. The contents consist of Water, Glycerol and free fatty acids. Following a treatment
the Glycerol or sugar is rapidly absorbed by the body. The water carries the free fatty acids,
through the lymphatic system, through the kidneys and are then passed out of the body in your
urine.

 

Our Services

1.  One year warranty, if there any problems happens with your machine, we will repair it free of charge.

2. Convenient training, user manual and operation video are available, also, if it is not enough, we can provide the online face to face education.

3. OEM/ODM services, your logo, outshape, language, interface can specially be designed on your machine.

4. After sales service, offer 7*24 hours online service, lifetime free maintainance, technology support forever.

 

Company Information

 

Certifications

 

Exhibition

 

 

 

Packaging & Shipping

1. Packaging: Standard Air Package.

 

2. Shipping: We can offer the door to door service by air or sea, just depend on your actual request. Such as DHL, UPS, TNT, FEDEX… by air; and the sea transportations.