Kaneko 4-way solenoid valve (SINGLE) -MT16G SERIES (China Manufacturer) - Pneumatic Component - Machine Hardware Products

Kaneko solenoid valve 4 way MB15G SERIES single

Kaneko solenoid valve 4 way MT16G SERIES single

Kaneko solenoid valve 4 way MK15G SERIES single

Feature

MT16G series solenoid valve is a four-way pilot solenoid valve.

It is used to drive the hydraulic cylinder mainly double.

Standard specification

FLUID

CLEAN AIR

Port size

8A(1/4″)

WORKING PRESSURE

0.15～0.99MPa ( DL：0.3～0.99MPa )

Response time

0.2second

Cv. FLOW FACTOR

0.81

9. Kaneko 4-way solenoid valve (SINGLE) -MB15G SERIES

Kaneko solenoid valve 4 way MB15G SERIES single

Kaneko solenoid valve 4 way MT16G SERIES single

Kaneko solenoid valve 4 way MK15G SERIES single

Feature

The main valve is of the spool type that requires no oil lubrication.

A combination of a specially configured packing and a spool enables oilless operation.

Manual button provided as standard

All types are provided with a manual button.

Easy maintenance.

Long-life products. Engineered with prime importance on ease of maintenance, they are very simple in construction with smaller number of component parts.

Also available as three-way valves

You can also be used as a three-way valve by pl ing in either standard out is square.

Standard specification

FLUID

CLEAN AIR

FLUID TEMPERATURE

-20 ～ 60℃

AMBIENT TEMPERATURE

-20 ～ 60℃

DUTY CYCLE

100% CONTINUOUSLY RATED

OPERATING VOLTAGE RANGE

+10，-15％

WORKING PRESSURE

0.15 ～ 0.99MPa

Cv. FLOW FACTOR

0.5

ELECTRICAL SPECIFICATIONS

See below

ELECTRICAL SPECIFICATIONS

AC			DC
V/Hz	INRUSH A	HOLDING A	V	A
100/50	0.22	0.16	24	0.25
100/60	0.18	0.09	48	0.17
110/60	0.20	0.10	100	0.061
200/50	0.11	0.053	110	0.067
200/60	0.09	0.050	125	0.054
220/60	0.10	0.051

AC			DC
V/Hz	INRUSH A	HOLDING A	V	A
100/50	0.27	0.16	24	0.33
100/60	0.25	0.13	48	0.15
110/60	0.25	0.15	100	0.072
200/50	0.14	0.08	110	0.08
200/60	0.13	0.07	125	0.06
220/60	0.13	0.08

Product Image

MB15G GENERAL PURPOSE TYPE

MB15G-8 ～ 10 GENERAL PURPOSE TYPE
NOMINAL DIAMETER	MOUNTING LENGTH	H
8	50	167
10	50	167

MB15G EXPLOSION-PROOF TYPE

MB15G-8 ～ 10 EXPLOSION-PROOF TYPE
NOMINAL DIAMETER	MOUNTING LENGTH	H
8	50	196
10	50	196

10. Kaneko 4-way solenoid valve (SINGLE) -M15G SERIES

Kaneko solenoid valve 4 way MB15G SERIES single

Kaneko solenoid valve 4 way MT16G SERIES single

Kaneko solenoid valve 4 way MK15G SERIES single

Feature

Internal sliding parts extremely slippery by the hard-anodized, stick-slip has excellent abrasion resistance in operation can not operate even without lubrication.

The main parts are made of aluminum alloy, has become very small and light.

You can be easily replaced AC, DC coil is designed so that both fit into the same casing.

Corrosion treatment has been applied in a very strong hard anodized corrosion resistant.

Flameproof is a test of the Ministry of acceptable product.

Main valve is not malfunction due to spring for actuation by a piston, without the need for a spring, also be left for a long period of time and therefore will operate off balance spool type.

With buttons for manual, you can check or test operation.

Minimum operating pressure is 0.1MPa operate reliably in because there is no Earosu.

You can also be used as a three-way valve to select the port in the form of port 5.

Standard specification

FLUID

CLEAN AIR

FLUID TEMPERATURE

-20 ～ 60℃

AMBIENT TEMPERATURE

-20 ～ 60℃

DUTY CYCLE

100% CONTINUOUSLY RATED

OPERATING VOLTAGE RANGE

+10，-15％

WORKING PRESSURE

0.1 ～ 0.99MPa

Cv. FLOW FACTOR

0.87

STANDARD VOLTAGE

See below

STANDARD VOLTAGE

AC			DC
V/Hz	INRUSH A	HOLDING A	V	A
100/50	0.27	0.16	24	0.33
100/60	0.25	0.13	48	0.15
110/60	0.25	0.15	100	0.072
200/50	0.14	0.08	110	0.08
200/60	0.13	0.07	125	0.06
220/60	0.13	0.08

Product Image

M15G GENERAL PURPOSE TYPE

M15G-8～10 GENERAL PURPOSE TYPE
NOMINAL DIAMETER	MOUNTING LENGTH	H
8	60	123
10	60	123

M15G EXPLOSION-PROOF TYPE

M15G-8～10 EXPLOSION-PROOF TYPE
NOMINAL DIAMETER	MOUNTING LENGTH	H
8	60	138
10	60	138

M15G HYDROGEN EXPLOSION-PROOF TYPE

M15G-8～10 HYDROGEN EXPLOSION-PROOF TYPE
NOMINAL DIAMETER	MOUNTING LENGTH	H
8	60	156
10	60	156

M15G DUST EXPLOSION-PROOF TYPE

M15G-8～10 DUST EXPLOSION-PROOF TYPE
NOMINAL DIAMETER	MOUNTING LENGTH	H
8	60	190
10	60	190

DESCRIPTION OF OPERATION

11. Kaneko 4-way solenoid valve (SINGLE) -MK15G SERIES

Kaneko solenoid valve 4 way MB15G SERIES single

Kaneko solenoid valve 4 way MT16G SERIES single

Kaneko solenoid valve 4 way MK15G SERIES single