| |
Series |
PGP/PGM500 Series |
|
|
|
|
|
|
|
|
|
|
| Specifications |
8.3,12.8,16,24,31,40,51.5 |
| Working pressure |
Rated pressure 35 MPa, peak pressure 42 MPa |
| |
Characteristic |
· High pressure, continuous working pressure up to 275 bar |
| The high strength material and large diameter of the shaft reduce the load of the bearing and adapt to the work under high pressure. |
| · Low noise |
| PGP 503 is 9 teeth gear, PGP 505 and PGP 517 are 13 teeth gear, PGP 511 is 12 teeth gear, and the flow distribution structure is optimized, so that pressure fluctuation is reduced, the operation is unusually smooth and quiet (PGP 511 also has noise reduction "secret track" type available). |
| · High efficiency |
| Under all working conditions, the floating sleeve structure with pressure balance can ensure the highest efficiency. |
| Application flexibility |
| Internationalized installation and connection dimensions, the ability to integrate various valves, and the configuration of multi-pump sharing imports provide unparalleled flexibility in system design and application. |
| · Very many types of control valves can be installed integratively |
