rolling door making machine

Model:	-
Brand:	XINBO
Origin:	Made In China
Category:	Industrial Supplies / Construction Machine
Label:	forming machine
Price:	-
Min. Order:	1 pc

Inquire Now

Product Description

Shutter door making machine

roller shutter door roll forming machine, automatic rolling door making machine

Product Application：

This Iron Steel Rolling Shutter Door Slats Roll Forming Machine Prices line uses galvanized steel sheet, colored armor plate or aluminum plate as the material plate. The products produced by this Iron Steel Rolling Shutter Door Slats Roll Forming Machine Prices are bright in colored, against fading, resistant to rust, and be widely used in shops, working departments, warehouses, and fire partition. Its strength is three times higher than aluminum alloy door.

Technological process：

Uncoiler-Feeding-Leveling-hydraulic punching-Hydraulic cutting-Roll forming-Output table

Technical parameter：

1.Suitable material	Color steel sheet , galvanized steel sheet,aluminum sheet
2.Installation Dimension (LWH):	6.5m1.5m1.4m
3.Main motor power	4KW with Cycloidal reducer
4.Hydraulic station power	4KW
5. Hydraulic oil pump	CB-E 310
6.Thickness of material	0.3mm~1.0mm
7.Diameter of principal axis	Φ70-90mm
8.Material expand width	1000-1250mm
9.Electric tension	380V 3phase 50HZ or as the customer's requirements
10.Material of roller	High grade 45# forged steel plated with hard chrome plating
11.Controlling system	PLC
12.Processing speed	8-12m/min(glazed tile is 2-3m/min)
13.Processing precision within	1.00mm (depend on design)
14.Material of cutting blade	Cr12 mould steel with quenched treatment
15.Kind of drive	0.6 inch chain link bearing model 6210
16.Roller station	11-20 Rollers
17.Roller material	high grade 45#steel; Cr12 quenching
18. Leak frame load-bearing	4.6T

Rollers

In order to get high quality product, our machine adopts welded steel frame structure, AC frequency conversion motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment and chrome coating.

Roller Station:11-18rows

Or custome an customer's requirements Thickness of feeding material：0.3-0.8mm

Computer Control Cabinet

It adopts MITSUBISHI PLC to control. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

Hydraulic Station

It is derived by a Gear Pump. After filling the hydraulic oil into the hydraulic oil tank, the pump could drive the hydraulic cylinder to realize the cutting function.The system includes a set of hydraulic tank, a set of a Gear Pump, two hydraulic pipes .and two sets of Solenoid Valves.

Power of The Pump:4kw

Hydraulic oil :40#

more information you can view here