Marine Drinking Water-- Portable Design

 

＊M-60 water machine is designed to make high quality potable water from seawater and high salt brackish water. The water machine produces 60 to 1000 liters of water per hour.

＊M-60 water machine is based on the most popular reverse osmosis technology.

＊This water machine is modular in design， with high pressure pumps， electronic controls and instruments integrated into the pressure unit (PU). The membrane shell and membrane are integrated on the membrane unit (MU).

＊Quick links are used between PU and MU. A chemical cleaning pump， water tank and quick connect line are integrated into the chemical cleaning unit (CCU).

 

＊M series starts and stops with one button. The M series is equipped with a remote control to remotely start and stop the device within 15m of the device and monitor the system's operating status.

 

 

 

 

Cpure Water Treatment Marine Drinking  Water Treatment Advantage

 

＊Corrosion resistant， use non-welded duplex steel piping and fittings for longer life and better corrosion resistance without worrying about long-term contact with seawater. The frame is made of 304 stainless steel and painted， which is beautiful and effective to protect the frame from salt spray and liquid leakage.


＊Waterproof design， IP55 protection class IP55.


＊Plug and play， PU， MU and CCU are modular in design and easy to install on site.


＊Remote control control， no need to go to the engine room or down to the cabin every time to switch on and off， the status of the water tank can be known at any time.


＊Separate design of the central processing unit， membrane unit and chemical cleaning unit simplifies the use of the system， eliminating the need for the user to maintain and maintain the membrane.


＊Lightweight design， PU can be lifted by 2 people， MU can be transported and installed by 1-2 people.
A 10 micron absolute accuracy or better filter element ensures safe operation of the high pressure pump and reverse osmosis membrane.


＊Super duplex stainless steel axial piston pump from Danfoss is smaller， lighter and more efficient than conventional 3-cylinder plunger pumps and requires no maintenance for up to 3 years.


＊Use high-pressure hoses to simplify connections， reduce vibration and noise， and partially eliminate the effects of water hammer.
Highly desalinated seawater reverse osmosis membrane from Dow or Toray.


＊A variety of paint colors are available， and a variety of mounting options are available.


＊Optional sand filter kit (manual operation)， optional when the influent turbidity is high.


＊An optional carbon filter kit (integral activated carbon filter) removes the taste and possible harmful organic matter in the produced water.


＊An optional UV kit (UV sterilizer) is available to ensure the safety of drinking water.


＊An optional chemical cleaning unit that cleans and maintains the membrane.

 

 

 

Cpure  60L/H  Sea Water Filter Product Water Capacity Specification List

 

 

Technology Parameter	Unit	M-60	M-100	M-200	M-300
Rated Water Production	LPH	60	100	200	300
	GPH	15	26	53	79
Rated Recovery Rate	%	15	25	34	34
Min Input Pressure	barg	2	2	2	2
Max Input Pressure	barg	5	5	5	5
Min Continuing System Pressure	barg	10	10	10	10
Max Continuing System Pressure	barg	70	70	70	70
RO Membrane Size	inch	2540	2540	2540	2540
RO Membrane Quantity	pcs	1	2	4	6
Machine Size cm	cm	132x55x50	132x55x50	132x55x50	132x55x70
Net Weight	kg	38	46	66	84
Rated Power	kW	1.4	1.4	2.1	2.1
Power Input                    1PH， 220 AC±10%， 50Hz  3PH， 380 AC±10%， 50Hz

 

 

Background Photo--Portable Design

 

 

 

Seawater / Brackish Water Filter Using ATTENTION:

 

--A separate chemical cleaning unit (CCU) is usually installed at the service point or service center to maintain and maintain the MU (sterilization and chemical cleaning).
--To extend the life of the membrane.
--CPU is usually housed in a fishing boat， yacht or self-service hotel， or rented by a user.
--User proposes or rents the MU from the service point (center) for short-term use and returns it after use.
--M-60 reverse osmosis machine is designed and manufactured in accordance with industry standards such as ASME， ASTM， and IEC.

 

 

Remarks:

1) The rated water production is based on the design of the influent (35，000 ppm， 20 ° C standard seawater).

2) The normal operating pressure of the system should be higher than the minimum pressure and lower than the maximum pressure.

3) Dry weight includes all components， excluding running water weight.

4) Maximum operating power at rated power of 70 bar.

 

 

                                                                      MESSAGE US TO GET QUOTE