1, Instruction: 

Busbar machine is also called busbar processing machine, busbar punching bending shearing machine, copper busbar machine, aluminum busbar machine, which is mainly used in electric industry.

This machine is devised by our engineer, only our factory can manufacture this machine in the world at present.

2, Main Characteristics:

1) This processing center is a special equipment used for copper or aluminum busbar processing in electric power, equipments for high and low voltage and busbar groove industry with characteristics of high efficiency, low consume, labor-saving, environmental, high accuracy, attractive in appearance, easy to operate and so on.

2) This center has original processing principle and method, which is completely different from the former conception of processing. It is adopted 4-axis control and 1-time clamping method. Work of punching, bending, shearing and so on can be finished without the aid of operator from rough material to finished work pieces, only clamping the banded pre-processing busbar to its right position for one time and matching with related programming operation. Work pieces are automatically finished and the waste is recycled completely.

3) This center adopts double pneumatic clamps, which achieves interactive accomplishment of automatic feeding without limiting the length of busbar with the location accuracy of ±0.1mm.

4) Punching unit takes 8-die turret punching method. Choosing die, locating and accurately controlling pitch of holes are finished automatically.

5) Adopting special bidirectional bending system to guarantee left-right bending finished one time. The precision of bending angle is controlled in ±0.5°. Shearing unit takes the method of punching. Work pieces surface is neat and smooth.