Fsc-2 optical fiber end face detector can detect both male (jumper) and female (optical module / optical device). It is an excellent tool for optical fiber network maintenance, engineering construction and high-end production line of device manufacturers. It is widely used in optical laboratories such as telecommunication, mobile, Unicom, radio and television, power, device manufacturers, universities and scientific research institutions. It can reach 200 times, 60 times on different display terminals. 0 times, 1200 times magnification. Video observation, no harm to eyes! Hand held design, truly portable, suitable for on-site operation of machine room.

 

Product Brief
Fsc-2 optical fiber end face detector can detect both male (jumper) and female (optical module / optical device). It is an excellent tool for high-end production line of optical fiber network maintenance, engineering construction and device manufacturers. It is widely used in optical laboratories such as telecommunication, mobile, Unicom, radio and television, power, device manufacturers, universities, scientific research institutions, etc.

It can achieve 200 times, 600 times and 1200 times amplification effect on different display terminals.
Video observation, no harm to eyes!
Hand held design, truly portable, suitable for on-site operation of machine room

Two, product characteristics
1. 200 times magnification (3.5-inch display), 0.75 μ m resolution;
2. All male end faces of optical fiber connectors, such as SC, FC, LC, E2000, mu, St, can be tested for PC and APC.
And the female end faces in all adapters;
3. The contrast and brightness of the display can be adjusted to facilitate the display and observation in any environment;
4. Continuous operation for more than 8 hours, battery life up to 2000 charges and discharges;
6. Small size, light weight and exquisite package;

 

Detector magnification
The optical magnification of fsc-2 is 12 times, the video image on the 9-inch display is 600 times, the magnification of video image is displayed and output in different sizes, and the image size displayed on the screen is also different. List of image size (or magnification) of common displays:
Monitor
index
3.5 inches
9 inches
14 inches
17 inches
Image diameter size (CM)
Two point five
Eight point one
Twelve point three
Fourteen point five
multiple
Two hundred
Six hundred
Nine hundred and eighty
One thousand two hundred and eighty

A. the above image size is measured on the display screen, and the magnification is as follows:
Image size (μ m) ÷ 1.25 μ M = m × 100 = m (CM) calculation
B. the size (magnification) of the image refers to the size data without distortion at the resolution of 1.25 μ m;

IV. tester specifications
size
18.6 * 5.2 * 5.0mm
weight
170.00G
Resolving power
1.25 mu m
Optical power
12X
visible area
0.3MM*0.28MM
Electronic viewfinder
1 / 3in black and white CCD
light source
Built in LED blue light source (over 100000 hours of service life)
Focus control
Manual coaxial focusing
work environment
-20 ℃ -- 50 ℃
Warranty period
A year

IV. standard configuration
Test conversion head
explain
Number
Fsc-2 detector
Fiber end image detector
1
3.5LCD
3.5-inch display
1
1.25PC-M
Inspect the end face of 1.25mm male PC such as LC, mu, etc.
1
2.5PC-M
Test the PC end face of FC, SC, st and other 2.5mm male fiber plug cores
1
LC/F
Insert LC and Mu flange to detect the end face of female optical fiber PC
1
FC SC/F
Insert FC and SC flange to test the end face of female optical fiber PC
1
Charger
3.5 lithium battery charger for display
1
Soft Backpack
Place complete standard accessories
1

V. quality assurance
The microscope host and display are free of charge for 1 year.