The body of anti-drip fine mist nozzle is made of brass, with stainless steel nozzle core and stainless steel flow leading vane(include a leakproof device) inside.

At the hydraulic pressure of 70 kg to 120 kg, it flows with high speed and forms centrifugal volution inflow leading vane.

Then it sprays a tiny hollow spraying drop of around 50 um with Teflon mesh, which can be widely applied in moisturization and man-made mist.

It introduced American driller for drill of spray hole, with a hole diameter of 0.1 mm to 0.15 mm. Compared with air moisturization, it cuts cost by ten times.

Material: Brass

Flow Rate: 20-243 ML/min

Thread Size: 1/8″ 3/16″