Description

 

FLD extruder screen disc filter is made from single, multi-layer or sintered stainless steel wire mesh in different shapes and edges. The single layer screen filter used in the plastic reclamation industry, with a Dutch weave filter used with a plain weave support filter; the metal mesh laminates is placed into the extruder head; the wire mesh filter rim packs feature spot-weld packs with an Aluminum or stainless steel rim added for rigidity and strength. These are for use where the extruder screen filter is operating for at high pressure or if there is danger of contamination getting around the edge of the break plate.

Features and Benefits

1. Wide temperature range up to 480℃, non-combustible;
2. Wide range of permeability available;
3. High strength and durability;
4. Anti-corrosion, anti-acid, anti-alkali;
5. Steady filter rating from 1um to 100 um;
6. Undeform because of its protective layers;
7. Be used for high pressure or high viscosity environment and industry;
8. Suits for cutting, bending, punching, stretching and welding;

 

Material:

Filter Media Woven mesh or perforated mesh made of stainless steel 304, 304L, 316, 316L, 317L, 904L, & Monel Hastelloy carbon steel, brass etc.

Available in variety of shapes and sizes, circle, kidney, leaf, oval, cylinder, rectangular and other shapes;

Applicant:

  1.) Edible oil industry;

  2.) Beverage industry;

  3.) Chemical industry;

  4.) Pharmacy industry;

  5.) Petrochemical industry;

  7.) Vital oil distillation;

  8.) Lube kind of oil re-refining;

 

Maintenance

   1.) The sintered replacement basket filter and strainer is the filter core. The wire mesh belongs to the wear parts. It needs a special protection.

   2.) After the filter has worked for some time, the impurities are removed in the filter core in time.

   3.) When cleaning the impurities, the wire mesh should be care to ensure that the core is not deformed or damaged.

   4.) Once the wire mesh is deformed or damaged, it should be replaced immediately.

 

The following parameter will be confirmed before order:

1.) Size;

2.) Work pressure;

3.) Operation pressure;

4.) Material;

5.) Flange standard;

6.) Dielectric;