Application 

 

Engineering Truck with Wet-mix Shotcrete Machine GHP30G is a new type of small-size
concrete shotcrete equipment by mechanical, electrical and hydraulic control developed by our company under the historical opportunity of national “One Belt and One Road”.
 

 

Specification
Parameters of the Whole Machine	Overall Dimension(L*W*H)	8050*2400*3170mm
	Total Weight	16500kg
Pumping System	Theoretical Spraying Displacement	30m³/h
	Concrete Cylinder Diameter	180mm
	Concrete Cylinder Stroke	1000mm
	Conveying Pipe Diameter	125-90mm Variable Diameter
	Maximum Aggregate Diameter	15mm
	Concrete Outlet Pressure	83bar
	Hopper Capacity	0.3m3
Travel System	Travel Mode	By Wheel
	Steering	Four-wheel Steering
	Minimum Turning Radius	6.3m
	Driving Mode	Four-wheel Drive
	Engine Power	103 kW
	Wheel Base	4450mm
	Wheel Track	2030mm
	Maximum Travel Speed	20km/h
	Maximum Gradeability	36%
	Minimum Ground Clearance	380mm
	Braking Distance	5(20km/h)m
Manipulator	Maximum Spraying Height	17.5m
	Maximum Spraying Width	2*15.5m
	Rotation Angle of Forearm	+60°~-180°
	Rotation Angle of Main Arm	270°
	Circumferential Rotation Angle of Spray Nozzle	±180°
	Horizontal Rotation Angle of Spray Nozzle	±120°
	Swing Angle of Spray Nozzle	8°(continuous)
Accelerating Agent System	Model of Accelerating Agent Pump	MONO (ED12)
	Driving Mode	Hydraulic drive
	Accelerating Agent Displacement	0-1000L/h
	Maximum Outlet Pressure	20bar
	Accelerating Agent Tank Capacity	2*1000L
Hydraulic System	Main Motor Power	55kw
	Driving Mode	Diesel Engine, Motor
	Fuel Tank Capacity	450L
	Hydraulic Oil Dustiness	8~9 (NAS1638)
	Main Pump Displacement	145ml/r

 

 

MAIN FEATURES 

1. Double-power with oil and electricity is adopted, which can help solve the pipe-blocking by concrete resulted from concrete solidification due to that the electricity is cut off suddenly in construction and the mix in pumping system cannot be discharged from the working cylinder and conveying pipe.

 

2. The engineering equipment chassis is adopted, steering mode is divided into three kinds: four-wheel steering, front-wheel steering and crab-walking steering, which makes it possible for the whole machine to move and steer in situ; compared with the standard mobile chassis, its usage scope is wider, and it can be used for more working conditions, which greatly improves the trafficability of the whole machine.

 

3. The spraying system is operated by the wireless remote control, easy to control the action of the manipulator precisely, which is fast, effective, energy-saving, safe etc.

 

4. Pumping system adopts fully-hydraulic load sensory system, with less energy consumption, high work efficiency, low fault rate, less spare parts, low maintenance and usage cost, high system safety reliability and stable conveying capacity.

 

5. Communication System adopts the latest communication protocol PROFINET of Siemens, with fast data transmission speed, high timeliness and strong reliability. Meanwhile, it can be inline with Industry 4.0 Strategy perfectly.

 

6. The manipulator is folding and telescopic. There are totally 9 actions, that the main arm stretches out and draws back, faces upward and downward, and the forearm stretches out and draws back, swings horizontally, besides the forearm can track for horizontal moving automatically, makes the stretching scope of the manipulator wider, makes the manipulator more flexible, and makes it possible to work in narrow space as well as in wider space, not only suitable for full cross-section, but also suitable for half cross-section and multi-step excavation. It greatly improves the convenience of operation by the manipulator, the spraying quality as well as the application scope of the product.

 
FAQ

 

1. Are you factory?

Yes

 

2. How about your products quality?

There is QC team to control every order. The-third party testing is acceptable.

 

3. How about MOQ?

Depend on your request.Can be negociated.

 

4. How about production time?

Normally the machine are in stock.If no stock, it will take about 10 days. If busy, take about 15-25 days

 

5. How about delivery method?

Shipping as usual.If you have other request, can be negociated.

 

6.How about your sale service?

80 professional after-sales staff will serve you. If needed, overseas service center is available.

 

7.How can i place an order?

First method :Place order directly on alibaba if you are familiar with it

Second method : Please tell us specifications ,let's make a contract

 

8.How can i visit your factory?

Please inform to us when you have a visiting plan,we will provide all traffic details in China